Plans change as we discover some hidden issues with the 324. A new plan of attack is devised as the restoration continues.
Another Oldsmobile added to the fleet. Lets see what’s wrong. Welcome to Redline, Want to contact me: Email: Redline0442@yahoo.com Keep Up-to-date: Instagram: @toronado_trofeo
In today’s DIY video I will show you how to replace the lock cylinder on an older model (1990’s era) GM car with the passkey(2) system that has a resistor pellet embedded in the key. In my case it’s a 1995 Oldsmobile Ninety Eight Regency Elite. Also, there are ways to bypass the security (VATS) […]
This video will show you How To Replace Oldsmobile Cutlass Supreme Key Fob Battery 1990 1991 1992 To Order This Remote Visit:https://www.keylessentryremotefob.com/25602667_BUICK_Factory_OEM_KEY_FOB_Keyless_Entry_R_p/25602667%20buick.htm or call us at 402-671-5100
How to video. I made a little fun video of replacing headlight bulb on a 1997 Oldsmobile Cutlass h
In this video my son and I replace the rack and pinion steering gear on his 1996 Oldsmobile Ciera. __________________________________________ CHANNEL DISCLAIMER The information provided by Andy (“we”, “us” or, “our”) on Andy’s Garage YouTube channel (the “channel”) is for general informational purposes only. All information on the channel is provided in good faith, however […]
We’re on our way to Jim’s to check in on how he’s making out on his 1957 Oldsmobile Rocket 88 engine install 🔥 IF YOU ENJOYED WATCHING: subscribe, leave a comment and hit the like button https://www.youtube.com/c/badchad CHECK OUT OUR MERCHANDISE HERE: https://www.hiltzautoco.com FOLLOW US ON SOCIAL MEDIA: https://www.facebook.com/badchadcustoms https://www.instagram.com/badchadcustoms https://www.facebook.com/macintyrejn https://www.instagram.com/___jolene MAILING ADDRESS: Hiltz […]
Watch as John Edwards @ Costa Mesa R&D Automotive Machine Shop takes you thru the steps to reface a set of rocker arms for a 394 Oldsmobile engine. 949-631-6376 Don’t forget to ‘Click’ and SUBSCRIBE!
In this video series I will disassemble a 1972 Oldsmobile 350. I am going to try and record every step, mistake, and repair along the way. My plan is to make this a mild performance engine that is reliable. Enjoy part 1 of the disassembly.
Installing a Fuel Pump on a 1970 Oldsmobile 455. I forget to mention I have the gasket tacked on the pump, you can also hang it on the stud in the block. Either way is fine, just don’t forget the gasket.
Installing the Camshaft, Timing Set, Lifters, and Valley Tray on a 1970 Oldsmobile 455 Engine.
I put this engine in from another running car. Not the best decision but life must go on
Valley trays help keep intake manifolds cooler by shielding the underside from oil “splashing”. Big block Oldsmobile engines have tapped holes for this style tray but small blocks do not. This is how to drill, tap, and install this style valley tray correctly. It’s recommended that this mod be performed on a disassembled block, not […]
Finishing the rebuild of the Oldsmobile 8.5 inch rear end including install of pinion, Posi unit, and axles.
How I went about building a dry sump oil pan of my Oldsmobile engine on the cheap.
Just a quick video on the installation of the temporary Edelbrock carb until I rebuild and re-bush the Quadrajet.
Jim wants to race this rusted and busted 1957 Oldsmobile Rocket 88 on a dirt track around his property so we’re going to put a floor in it for him 🔥 https://www.hiltzautoco.com #badchad #1957oldsmobile #oldsmobilerocket #oldsmobile #floorrepair #rustrepair *this video was produced prior to current restrictions
A friend purchased this 1985 Oldsmobile Cutlass 442 in order to use the interior for his Hurst Olds Cutlass and to part out the rest. Lets see if we can get this thing back on the road after 22 years of sitting abandoned in a field because of a “blown up” engine! If you need […]
In this video I will cover how I removed, restored, and cleaned dashboard gauges. Finally I will cover how to reinstall the gauges and talk about installing a new radio and dashboard speaker.
In this video I go through the entire process I had to go through. To get this TicTocTac back up and running correctly again. For reference I got the circuit board from https://www.cajuntachshop.com/. I really appreciate all the help they afforded me.
Quick video on installing the multi-piece Oldsmobile alternator bracket. Also how to install the alternator and finish up with the bypass hose.
In this video, I show the speakers that I installed into my 1987 Oldsmobile cutlass. We also discuss a issue I ran into while installing the new 4×10 Kenwood speakers.
Oil priming with the Olds Performance Products oil primer tool.
Headlight motor for a 1990-1992 Oldsmobile Toronado Trofeo Welcome to Redline, Want to contact me: Email: Redline0442@yahoo.com Cars I currently own: 1972 Oldsmobile Cutlass 1983 Buick Park Avenue 1987 Oldsmobile Toronado 1990 Oldsmobile Toronado Trofeo Keep Up-to-date: Instagram: @toronado_trofeo
In this video, I will be showing you how to change out your Master Cylinder & Brake Booster on a 1970 Oldsmobile Cutlass Supreme. This will be similar other A Body GM Vehicles from the era including Camaros & Chevelle’s. Stay Tuned for the upcoming video in regards to our new brake lines, rear wheel […]
Installing a water pump, oil fill tube, and oil pressure sender on a 1970 Oldsmobile 455.
Looking at the seal area of a vibration damper for a 455 Oldsmobile V8, then explaining a little about how Oldsmobile fitted pistons into cylinders. From there, the removal of the front timing cover to see what was lurking under there. All in all, still not too bad. Again mark the parts, categorize them, take […]
This was a fun day Girlfriend enjoyed doing some of the work also, Sucks that we lost some footage. Enjoy Please like, share and subscribe to the channel
Installing a set of E heads on a 1970 Oldsmobile 455. When using oil restricted pushrods, the small hole typically faces the rocker, NOT the lifter, I misspeak in the video. It will not ruin your engine if you install them with the small hole facing the lifters, I have seen many run that way […]
Installing the oil pump, windage tray, front baffle, and oil pan on a 1970 Oldsmobile 455.
I’m installing a Torker intake manifold on a 1970 Oldsmobile 455. I find Oldsmobile engines respond surprisingly well to this style open plenum manifold. I like to place the intake gaskets dry first and see if the front and rear rubber seals contact the intake. if there is excessive space due to machining, you may […]
Welcome to Redline, Want to contact me: Email: Redline0442@yahoo.com Keep Up-to-date: Instagram: @toronado_trofeo