Car Fix DIY Videos

Bought and installed a Toyota 3000k carb on my 87 suzuki. Video is simple. I tried to showcase each step while reading the instructions from the kit. I hope this helps others.

In this video I go over the process of Replacing the starter motor on 89 through 98 Geo Tracker Suzuki Sidekick and Samurai. This is a fairly easy task that can save you a lot of money rather than having a shop do the work. Step by step instructions and a few tips will give […]

This is episode 8 of my Suzuki Samurai Diesel Repair series. In this episode of DIY WILLY we will re-install the Fuel Injection and Cooling systems. Follow along with me on my journey to repair my Suzuki Samurai with a VW Turbo Diesel. I have more videos coming on the Samurai. So please stay tuned […]

After crushing my rocker panels on every trail run I’ve done with Samurai, it’s finally time to install some armor! This is a fairly straight-forward install, but I offer up some tips that might help you put them on, and might even prevent you from buying the wrong ones for your rig. LROR Rock Sliders: […]

In this video I install a spartan locker and change the differential carrier bearings on a 1987 Suzuki samurai front axle.

We Install the Certified Machine Toyota 3K carburetor on a Suzuki Samurai. This kit is very nicely put together and includes everything needed for the job. The process is well explained in the included instructions but we thought a Hwy83 Suzuki install video would be icing on the cake! Step by step we show the […]

This video shows the installation of the piston rings, pistons, connecting rods and rod bearings on a 1.3L Suzuki Samurai Engine. Visit us at: http://www.lowrangeoffroad.com or call 801-805-6644. We are you one stop shop for Suzuki and Toyota Parts.

A common oil leak on the 1.3 and 1.6 engines. This video goes over the procedure for Replacing O-ring gasket seal on the distributor housing of the Suzuki Samurai sidekick in Geo Tracker. When removing and re installing the distributor you will need to be sure you have the engine in the correct timing. I […]

In this episode of DIY WILLY we start to reassemble the diesel engine. First I’ll clean all the stud holes and prep the new gasket for install. Putting the head back on, which proved to be a difficult task by myself as the samurai is tall and the engine is at an angle due to […]

This video shows the proper installation of the water pump and timing belt on a 1.3L Suzuki Samurai engine. It also includes proper valve lash adjustment procedures. For parts and tech support go to http://www.lowrangeoffroad.com or call 801.805.6644.

Suzuki Samurai Hybrid Diff Part 4: Installing the TRE Air Locker In this weeks video i show how to install the TRE Air Locker, I show in detail what needs to be drilled and tapped, how to bend the copper tube and things to watch for to have a successfull install. Click the link below […]

This video shows the procedure for installing a venturi vent tube in the carburetor of a 86-88 Suzuki Samurai. This small enhancement can resolve a hesitation at mid throttle. Visit us at: http://www.lowrangeoffroad.com

If you have a Samurai it’s like that your factory plastic handles are already broken, or will break soon. We decided to replace ours with an aluminum handle kit from LowRangeOffRoad. The installation is fairly straight forward, but there are a few tricks that can speed it up. Good luck with your install. Instagram: @fortuneanddeath

In this video I show you how to install a winch on your 4×4. This can be applied to any 4×4/4wd like a Jeep Wrangler, Toyota, Chevy, Ford, or in this case a Suzuki Samurai (Also known as the Suzuki Jimny, Suzuki Sierra, Suzuki Santana, or Maruti Gypsy in other countries). Including how to mount […]

In this video I’ll be showing ya’ll how to replace the clutch on a Suzuki Samurai. As well as showing you some upgrades that can be done while you’ve got the transmission out of the truck. Dr. Z’s HD Transmission Mount: http://www.drzfab.com/product/samurai-hd-tranny-mount/ Petroworks High Performance Clutch: http://www.petroworks.com/high-perfomance-clutch-by-petroworks/ Video that explains proper driveshaft angles and phasing: […]

Here in this video I show how to remove the stock clutch fan and shroud and reinstall a Hayden Electric Fan in a Suzuki Samurai.

On this episode I replace my old starter with a new one.

Here I show you how to R&R your speedo cable and install the white face guage overlays from Roadless Gear and other providers.

Suzuki Samurai, Replace top Garnish & Seal Soft Top. I your Suzuki Samurai (SJ310, SJ413, Jimny 1300) leaks water at the top of the windshield in heavy rain, the garnish molding on the top of the windshield is the likely source of the water leak. You are better off getting a new garnish windshield seal […]

Install Heavy Duty Steering Stabilizer, Suzuki Samurai. A heavy duty stabilizer is a must for a Jeep or Suzuki Samurai if you install larger tires and it’s not a bad idea in the stock configuration if you want maximum stability at highway speeds or when driving over bumpy roads. Old Man Emu’s (OME) Samurai steering […]

Suzuki Samurai T-case Shifter Stuck? Stuck in Neutral and your sami wont move? This video shows you how to replace a shifter sheet on a 1987 Suzuki Samurai. This video also explains how to get a T-case shifter unstuck so that you can hit the trails again.

Hello, this is the first video posted by me in YouTube. I will try to make more videos like this and I hope you enjoy them. In this vid I show how we have repaired the steering column of our Suzuki Samurai after driving intensively in the mud.

Simple Suzuki Samurai, Change Dash Lights. Simplicity and ease of repair is something that is totally lost on today’s cars. With this 1985 Suzuki Samurai (SJ413, Jimny 1300) simplicity is everywhere and the Suzuki Samurai is extremely easy to take apart, repair and fix. Fixing or changing the dash lights on the Suzuki Samurai is […]

Suzuki Samurai, Clicky Starter Fix The problem of no start and just a click is because the power turning over the starter goes through the key switch. Newer vehicles run a relay putting direct battery to the starter. Install this relay and it will fix the problem of the Suzuki Samurai no start and click-click. […]

How to replace front suspension & stabilizer (Suzuki Samurai) Bushing better than new

This video shows how to install a crankshaft in a 1.3L Suzuki Samurai engine. It includes the installation of main bearings and how to check for proper main bearing clearance using plastigauge. Visit us at: http://www.lowrangeoffroad.com or call 801-805-6644. We are your one stop shop for Suzuki and Toyota needs.

Fixing Suzuki Samurai Fender Rust Here I am using 18 gauge steel, special panel adhesive and truck bed lining to repair a small rusted out area on the bottom…

http://www.kydexbyparlusk.com.

Suzuki Samurai -Replacing Body Snaps for Soft Top. This is a how-to on changing out the snaps that are on the body of the Suzuki Samurai that hold the soft t…

Suzuki Samurai – Fixing Side Marker Lights & Interior Light. One of the side marker light had a corroded light socket. Since this is actually a Jimny 1300 an…

Suzuki Samurai – Fixing Side Marker Lights & Interior Light. One of the side marker light had a corroded light socket. Since this is actually a Jimny 1300 an…

Heres a short video on Replacing the front axle bearings on a 4 wheel drive this is about the same on any of the older 4 x 4 rigs , jeeps,broncos,harvesters,…

Naprawa sprzęgła w Suzuki Samurai za 2zł na samoobsługowej myjni ciśnieniowej po zatopieniu w błocie :D.