Car Fix DIY Videos

In this episode of the 991 Build Series I will walk you through 10 steps needed to install the Soul Performance PSE Valved Exhaust on your Porsche 991. That said, these steps are similar for many other Porsche exhausts. Follow this DIY how to and potentially save thousands doing this relatively easy project yourself. Thanks […]

Instructions on how to install the Greg’s Race Parts (GRP) gated shifter on a series 2 Lotus Exige S right hand drive. It needed a few tweaks and modifications but in the end I managed to get this mod working really well and it really looks the part, makes the whole interior look way better […]

In this episode of this series, we will be working on the interior due to some normal wear and tear on our 2008 TL Type-S build project. Dashboard, front driver’s seat bottom leather cover, brand new OEM steering wheel and shift knob will be all replaced. Parts List: Dashbaord: 77120-SEP-A03ZA Steering Wheel: 78501-SEP-A01ZB 6-Speed Shift […]

In Episode 28, we’ll replace the screen in a SAAB 9-3 SID (SAAB Information Display). I opted for the more expensive screen+cable option rather than the cheap “just cable” solution as, although it’s more expensive, it is MUCH easier to install.

I bought a Chinese knock-off of the $30k Star Diagnostic setup for AU$1k – does it work? Find one here: https://m-g.uy/3959OS8 ↓↓ Click to read more ↓↓ Yes it does – and it’s perfectly good enough for home use – bargain! SUBSCRIBE to MGUY: https://m-g.uy/subscribe Follow MGUY on Instagram: https://m-g.uy/insta Follow MGUY on Twitter: https://m-g.uy/twitter […]

This video will walk you through the removal and installation of the water pump on a Land Rover. Please like and subscribe.

My Patreon: https://www.patreon.com/labcoatpaul?fan_landing=trueT5 Torque specs: Rear CV axle flange nuts: 41 ft-lb (56 Nm) Axle nuts: 160 ft-lb (217 Nm) Transmission fill and drain plugs: 36 ft-lb (49 Nm) Lug nuts: 80 ft-lb (108 Nm) Tool sizes: Rear CV axle flange nuts: 14mm Axle nuts: 30mm Transmission plugs: 24mm or 15/16″ Lug nuts: 21mm Transmission […]

Check out my new shirts here: https://teespring.com/saab-900-spg-apparel https://teespring.com/shop/auto-autopsy-saab-9-3-turbo-x Merchandise/Website: https://autoautopsyyt.com/index.php Instagram: @Auto.Autopsy Twitter: @AutoAutopsyYT Email: AutoAutopsyYT@gmail.com Outro song: https://www.youtube.com/watch?v=t2Ti8d992RM

In this video, I will show you how to install collapsible oil return tubes on an aircooled Porsche 911 engine. These oil return tubes often leak oil onto your exhaust and creating stink/smoke. Original style oil drain return tubes are captured between the cam tower and the case, but these collapsible ones are designed to […]

What’s the best thing about owning a Lotus? Apart from driving it of course…doing mods! And adding carbon/lightness as well. Today we’re installing the GRP wide side scoops made of carbon onto the car. I think it really suits my car and looks amazing as well as being functional. https://www.gregsraceparts.com/collections/carbon-fiber/products/carbon-fiber-side-scoops-standard-wide-versions-for-elise-exige-04-11 For more up to date […]

How to install a PerTronix Electronic Ignition Upgrade in a Porsche 911. This electronic solution will replace the mechanical points system, so no more reliability concerns with corrosion, humidity, or wear. The instructions that came with it were pretty generic, so I put together this video to help other owners upgrade their ignition systems on […]

We install a Ford nine inch carrier into our 9 inch housing on the 1967 Mustang Fastback. Most all of our tips and tricks on how to do this will apply to the Ford 8 inch center section on an eight inch housing. http://www.autorestomod.com/ http://www.youtube.com/autorestomod Thanks for watching! Video links: Nine inch carrier build: https://youtu.be/LeWfDTZEW0Y […]

On Episode 2 of #PROJECTFX35 Chris is replacing the driver mirror on his 2008 FX35. In this video he shows how to remove the door panel to access the 3 bolts holding on the mirror on… This is one of many DIY videos to come as he restores some issues with his recently acquired and […]

#rustrepair #classiccars #peugeot Welcome to FLIP MY RIDE where we, FIND IT. BUY IT. FIX IT. FLIP IT! There is nothing nice about rust and what it does to your pride and joy! The boot on our Peugeot 504 looks shocking and really detracts from the overall car. Time to sort this out. Watch as […]

Andy Phillips shows how to replace the keyless remote case on a damaged Kia key. DISCLAIMER: The individual featured on the Phillips Vision YouTube Channel identified as Andrew Phillips, also known as Andy Phillips is not a professional mechanic, contractor or certified repairman. He does not have any formal training in the automotive field, or […]

Squirtified Engineering General Car Care Let’s do some more work on my daily driver, a Peugeot 206 Sport 2005. I will show you how I replace a starter motor on a Peugeot 206. Unfortunately the quality is not as good as in my Japanese cars that I’ve had previously and currently. The starter motor is […]

This video will walk you through a step by step how to remove and install the shift tower on a 2008 Land Rover LR2. Please like and subscribe.

In this video, we put the front brakes back on the 96 Jaguar XK8 and take actions to ensure good ABS function. John from to the garage also shows how to set a Torque wrench. For links to the torque wrench and the brake parts installed in this video, please use the links below. Teng […]

When I first acquired my Sky Redline, I managed to discover very early just how LOW these cars actually are. Day 1 of ownership, a speed bump in Vegas impacted the driver’s side fender and destroyed the bottom. In this episode, I lay out the steps to successfully reconstruct the fender by repairing all of […]

Andy Phillips shows step-by-step how to replace the rear rotors on a 2013 Kia Rio EX. From removing the brake calipers to a detailed list of parts needed, Andy Phillips covers it all in this video!!!

https://www.patreon.com/labcoatpaul Torque wrench: https://www.harborfreight.com/38-in-drive-digital-torque-wrench-64915.html Torque angle gauge: https://amzn.to/3apyFBs Harmonic balancer puller: https://amzn.to/2MfkwPw Mountain 12 x 14mm wrench: https://amzn.to/3ag2ogg eDiag OBD 2 scan tool: https://amzn.to/39yWszK 0:00 intro 1:24 remove alternator 2:49 remove motor mount 3:25 remove power steering belt 3:54 remove harmonic balancer 4:32 remove timing belt 4:53 remove water pump 6:11 remove oil pump 7:53 […]

In this episode we make the Chrysler Hemi 5.7 sound like it should as we perform an exhaust install! Get your T-shirts to support Reignited here: https://www.reignitedtx.com/ My Instagram: @reignited.tx Email: Sales@reignitedtx.com SLP Loudmouth cat back exhaust: https://amzn.to/2H9biBj Here is a list of the most commonly used tools on my channel, I’m only listing actual […]

On Episode 4 of #PROJECTFX35 Chris addresses the annoying auto close feature that plagues older nissan / infiniti vehicles especially FX35 and G35 platforms. You can replace the door catches for fix yours for free as Chris demonstrates in this video…. This is one of many DIY videos on this channel and more to come […]

Andy Phillips shows step-by-step how to replace the rear Wheel Hub & Bearing Assembly on a 2013 Kia Rio EX. From removing the caliper and caliper bracket, to removing the rotor; it’s all covered in this easy to follow video!!!

This is the launch of our new series: The Garage. In the first episode we will show you how to install Mercedes-Benz Carrier Bars and Roof Boxes on your Mercedes. For more information about these and many other products, see our Accessories Configurator: http://configurator.mercedes-benz-accessories.com/en-MB?csref=_video_youtube:accEN This video is for illustrative purposes only. Observe the explanations and […]

Andy Phillips shows step-by-step how to replace the spark plugs on a KIA Rio 1.6L vehicle. Also includes setting the proper gap.

My 2002 Toyota Tacoma had significant frame rust around the rear leaf spring mount. This episode shows welding of the rear section on the truck to remove all rusty metal on the frame. I decided to go all in and replaced all suspension components in the back and make sure that rust was not going […]

New DIY Episode! See what happens when father and son fix Air Suspension in this free series about saving money. We use youtube videos and Playdough. We are now at a total savings of about $5500 for 6 episodes. Not Another DIY show features Keath ( dad ), Cayson ( toddler son ) and mommy […]

I’ll show you how to replace the clutch, flywheel, and pressure plate on an aircooled Porsche 911. I’m upgrading to a lightweight aluminum pressure plate with a Power Clutch kit from Sachs (3000 961 101). This kit will remove about 4lbs of rotational mass from your engine/clutch assembly, and not only is the pressure plate […]

Andy Phillips shows how to replace an Ignition Coil Pack on a 1.6L KIA Rio in this step-by-step video.

Changing your own GX470 Cabin Filter is an easy DIY task, and requires no tools.

Andy Phillips shows how to remove the fuel tank and fuel sending unit on a Pontiac Fiero, and replace the fuel pump.

Ferrari F430 Audio System Install Episode 3: Finish Wiring Doors In episode three of our Ferrari F430 Install, we repair the harnesses and finish running new speaker wires for the crossover, tweeters and speakers. Music by Lakey Inspired: https://soundcloud.com/lakeyinspired Video Chapters: 0:27 Previously 1:00 Repair Insulation 1:30 Repair Original Harness 2:20 Remove Previous Speaker Wire […]