In this episode we make the Chrysler Hemi 5.7 sound like it should as we perform an exhaust install!
Get your T-shirts to support Reignited here:
https://www.reignitedtx.com/
My Instagram: @reignited.tx
Email: Sales@reignitedtx.com
SLP Loudmouth cat back exhaust: https://amzn.to/2H9biBj
Here is a list of the most commonly used tools on my channel, I’m only listing actual tools that I have been using for years and that I have a proven track record with. I’ve been a certified dealer tech for over a decade, and I use these tools day in and day out. The camera and microphone you can see and hear their quality in every video. Obviously if you purchase a tool using one of these affiliate links I’ll get a small commission on it and every little bit helps me to continue generating more content! Thank you guys so much for watching and interacting!
Amazon Affiliate links:
My absolutely amazing gloves I’ve been wearing for 7 years now: https://amzn.to/3oOMMqy
Canon M50 camera bundle: https://amzn.to/2HclRUD
Saramonic Blink 500 mic bundle: https://amzn.to/3m00fcC
Milwaukee 1/2″ Fuel impact kit with case, battery and charger: https://amzn.to/2H973FT
Milwaukee 1/4″ impact with battery and charger: https://amzn.to/3dzvGb3
Ingersoll Rand 3/8″ impact :https://amzn.to/2HjJx92
My favorite wrenches! Gear wrench double box end set 8-19mm: https://amzn.to/2FDKxEN
Gear wrench stubby wrenches 10-19mm: https://amzn.to/3k9zm5K
Gear wrench reversible ratcheting wrench set Metric 8-25mm: https://amzn.to/3462zsA
Milwaukee 3/8 ratchet, tool only: https://amzn.to/348j1J6
Milwaukee 1/4 ratchet, tool only: https://amzn.to/31dewej
Gearwrench 1/4 swivel sockets 5-15mm: https://amzn.to/2T3MmOn
Autel professional scan tool: https://amzn.to/35abxVa
Gear wrench 21-25mm wrenches: https://amzn.to/2FHvBWe
U.S. general tool cart 5 drawer: https://amzn.to/3j4emvH
Double flex head ATD offset wrenches 8-19mm: https://amzn.to/348rewB
Vacuum coolant bleed machine- https://amzn.to/2TvUO98
My Instagram: @reignited.tx
Email: Reignitedsales@gmail.com
Great video man….more details and step by step action.. better than most I've seen
Good job on the series. Thank you for posting.
Nice sound i will try it on my hemi. Thanks
Dont forget to save for cam and lifters
Does this exhaust system resume or drone really bad inside the car when you're accelerating moderately but not hard I have a flowmaster system on my car and it sucks so would you please let me know if it drones really bad inside the car
My fathers friend had one of the first 300C in the Netherlands with the V8 Hemi engine. I remember my friend taking the car when his parent went asleep, we pushed the car with 3 man of the driveway, to start the engine 200 meters further. We where like 15 years old and overhere you need to be 18 for your license. The sound of the V8 was so impressive to me i would never forget that night and the people staring at us when we where at Mcdonalds. Now i am looking for my own 300C and ofcourse one with a V8 Hemi.
I have a question for you hopefully you can give me some in site. I have a 2018 Dodge Charger I was think of getting a stroker kit. What do you recommend if it’s just going to be for the street weekend car, and do the cylinders need to be bored? Any help would be great thanks.
I bought my first car @ 15 for $15, a 65 Nova. It had a 6 banger with a rod through the block. I pulled it out and built a 283 (60 over) with domed pistons, a solid cam, and, did my own 3 angle valve job (big back then:). Found a Munci M21 and a 456 rear end. Added an aluminum high rise with a holley 650, headers and then got into all kinds of trouble. I used to go to the court house on Fridays to pay my tickets..LOL. I also built a Vega, and an El Camino years ago, and today have a Hemi Charger in the driveway and a Hellcat Challenger in the garage.
My dad and step dad always made me fix my own vehicles, although I hated it at the time, it turned out to be the most valuable life lesson, because everyone wants a car, but not everyone can work on them.
Thanks again enjoy your day
Sounds great. Man wish that was mine. Good job
I installed the factory cat back exhaust from my '12 Challenger on our '14 300C, used two 4" spacers and had 2 extra clamps, bolted right up like stock and has that nasty hemi rumble at idle, pretty quiet when driving it and the 2.5" exhaust tubing really woke it up(stock is 2.25"). Had to shut off MDS with my tuner tool as the drone was very noticeable when it would come on, no more drone and runs great, and hauls a$$! Also cost me a total of 8 bucks for 2 ea. 2.5" ID extensions at the auto parts store.
Great video for someone who is contemplating a cat back exhaust upgrade! I'd use some anti-seize on the ends of the factory mid pipes to facilitate installation, and make it easier if you ever need to remove it again.
Would like to see tund shortly headers install (5.7)2011 Ram with broken bolts
When you are doing this by yourself, try bungee cords to hold the thing up temporarily. It will make fighting this thing off so much easier… especially if you are laying on your back in a driveway!
Just add and x pipe and stay with the original
Had an x pipe on my
After I owned my first car my 2008 Dodge Charger SRT8 I didn’t kno what I had I just thought it looked cool. And the more I’d robe it the more I wanted to know about it started watching donut media and any other car review /performance videos I just love cars and anything cars from the culture to racing to even car designs