Adam takes you through all the steps to remove and replace the window rollers in a 99-09 SAAB 9-5. The window roller kit used also fits NG900 (94-98) and OG9-3 (99-03). As a bonus, he describes how to fix a common issue, door rattles caused by a fallen sealing strip. It’s best to do this pre-emptively as this is a common failure and it can cause your window to fall down into the door. If you have a European car, eEuroparts has a huge selection of parts at the best prices online, check us out today!
){kind=link}
Is there any good way to reattach this window molding? Maybe some DIY? 🙂
I just fail this step and now I have small problem to reattach this piece of …
Did you use any lubricants to press door card between this window molding?
Thanks in advance for an answer.
wow this was awesome! I have lots of repairs to do on my 95
about that barrier… it`s not just for keeping moist out. It´s also importent for side airbag function. When the car gets a hit on the door a sensor in the door feels the presure difference and deploy. if that barrier is gone that pressure build up will not accoure and the airbag will not activate correctly.. You should also lubricate the rollers for best performance..athorwise good video… greetings from Sweden
gonna have to try this in the weekend… just bought a 2007 9-5 vector and as i was winding the windows down after it had been standing in the sun for hours, the passengerside window suddenly startet to tilt forwards and got stuck. Had to carefully move it up by hand and then put the roller up again to hold it in place… really irritating when you've only had the car 5 days and it was fine when i bought it.
Thanks! Was able to do this on a 2003 saab 9-5 linear thanks to this video. Took less than an hour.