Cool video, But you might want to use Locktite on the bolts. Being in that
position on the door it’s gonna want to loosen the bolts pretty quick. A
lot of jarring in that position.
i already have the kit installed in my truck….my problem is my alarm is
on the fritz and i have my external buttons tied into it….how do i run
the wires from my buttons on the out side to bypass the alarm…. mind you
i didnt install any of this bought truck already done…the alarm is an
autopage rs 855 lcd…i have the install manual and op0eration manual if
need be……any help would be much apreciated…
So your inside handle wount be use anymore? And the only way to open the
doors is with the poppers remote, right?? If you loose your remote or your
celinoide fails your fuked? Nice work man love what youve done to your truck
@PabloMillan09 sounds like the cable from the latch to the popper is to
tight so when ur driving the bouncing around is opening ur door…hope that
helps
That might be true man.. I do remember messing with that and tighten it one
time! I will loosen it just a bit and hope that helps… Thanks!! I
appreciate the help man!
You do it the same way, just hook up the door popper on the inside door
handle lever and unhook the door locks from the latch because you won’t
need them with shaved handles. Also make sure the door popper unlatches the
door latch before you shut the door. Here is a liitle trick i use- take a
screw driver and push it into the latch long side, then hit the door popper
and see if it releases the latch. You can do this before you actually close
the Door. Hope that helps.
Thanks for the video, it doesn’t make it easier for me but it helped
explain some things. Hopefully this will come in handy when I attempt this
soon. I already have my handles shaved. Time for the next step 🙂
I have another video that shows how to connect to the main power under the
dash. It’s called “How to wire up door poppers”
Been wanting to have this done to my 90 Accord. Now i think i can do it
myself. Thanks for the video.
what happen if your battery die? you wont be able to open it?
Now that youve been very detail on how to do it, I just might do it on my
celica all on my own… thanks. Very helpful.
Great video man its really gonna help me to do these on my 66 fury….keep
up the good work !
This might be a dumb question, what power source do you tap into operate
the door poppers?
Cool video, But you might want to use Locktite on the bolts. Being in that
position on the door it’s gonna want to loosen the bolts pretty quick. A
lot of jarring in that position.
one is glad to be of service!
thank you very much the vidio was ver helpful
How would you do this to a 98 four door tahoe? on the rear doors of course.
any info would be app reciated.
i already have the kit installed in my truck….my problem is my alarm is
on the fritz and i have my external buttons tied into it….how do i run
the wires from my buttons on the out side to bypass the alarm…. mind you
i didnt install any of this bought truck already done…the alarm is an
autopage rs 855 lcd…i have the install manual and op0eration manual if
need be……any help would be much apreciated…
So your inside handle wount be use anymore? And the only way to open the
doors is with the poppers remote, right?? If you loose your remote or your
celinoide fails your fuked? Nice work man love what youve done to your truck
@PabloMillan09 sounds like the cable from the latch to the popper is to
tight so when ur driving the bouncing around is opening ur door…hope that
helps
thanks scotty,great work.
Always use a fuse on the hot wire and use a negative trigger on the 5 pole
relay
thank you, this video helped me a lot.
That might be true man.. I do remember messing with that and tighten it one
time! I will loosen it just a bit and hope that helps… Thanks!! I
appreciate the help man!
You do it the same way, just hook up the door popper on the inside door
handle lever and unhook the door locks from the latch because you won’t
need them with shaved handles. Also make sure the door popper unlatches the
door latch before you shut the door. Here is a liitle trick i use- take a
screw driver and push it into the latch long side, then hit the door popper
and see if it releases the latch. You can do this before you actually close
the Door. Hope that helps.
Great and helpful….the 72 gets the treatment tomorrow…shaved last week
…solinoids and poppers tomorrow…thanks
Nice work
Good video learn a lot
This video you guys have made is very educational. Now i can do my trucks
poppers. Thank you. Shoot, who needs school??? Haha.
Thanks for the video, it doesn’t make it easier for me but it helped
explain some things. Hopefully this will come in handy when I attempt this
soon. I already have my handles shaved. Time for the next step 🙂
What is the name of the product and where to get it I wanted to put on a 96
eclipse
@12andomized that has happened to me before and I opened up my hood from
the latch with a flathead screwdriver..LOL Then I replaced the battery..
where did u get that kit at if u dont mind me askin
I hope this video helps you complete the job. Let me know how it goes!