In this episode, we tackle cleaning the throttle bodies on the G37. After a few stalls and rough idles, it was time for this service!
Tools needed:
– Flat Head Screwdriver
– 10mm socket/wrench
– T-5 Hex (allen wrench)
– Pliers
– Brake Cleaner
– Rag
){kind=link}
Do you personally clean parts for your customers or is it just for this platform? Are you located in LA ?
Does the same relearn work for the 2014 q50 with the 3.7?
Thanks so much!!! So glad I found this video!!
The throttle body bolts have an order they should be removed and re-installed; as well as a torque spec.
So u don't have to unplug the the throttle body??
no issue with brake cleaner on the rubber hose? 🙂 thanks
Is this the same on a Q50?
How do u get the infinty out of limp mode,,,car starts but has no power,,,throttle body cleaning???
Hey ro idk thaand nowi bave missfirewhat I do now
I know this video is old but wanted to ask. If I disconnect the negative ground on the battery will I still need to do a relearn after I'm done? I heard that if you disconnect the battery you don't have to do relearn. Do you know if this is true?
How clean egr valve
At least torque them to spec the right way they all have a sequence. Be careful.
Will this work on 2015 q50 3.7
Will this relearn work for 2007 Infiniti g35X
tried replacing my spark plugs and took a break when i couldn’t get the bottom right bolt on the throttle body. put everything back bud now it’s in limp mode with check engine light
Did all the cleaning and still my car is in limp mode, left the car sat for just a week and it revs slowly in every gear and will only go to 55mph any ideas what's going on??