powerflex
The bushings in the torque rod often go bad in the Saab 9-5 which causes excessive engine movement. Replacing them is an easy and quick DIY that can be done with only basic tools. Warning: I made a mistake in the video by putting the yellow bushing in with the wrong orientation. It should be […]
Sory of a DIY, but it was my first attempt at one so be nice haha. Powerflex Mk4 VW 10mm Shorter Front strut mounts, sourced from USRT Local Elevator by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300012 Artist: http://incompetech.com/
){kind=link}
){kind=link}
This is not a step-by-step DIY. There are a lot of procedures excluded; this shows the general work-flow. M5Board.com is your friend for torque specs and proper procedures. The bushing press….
){kind=link}
This is not a step-by-step DIY. There are a lot of procedures excluded; this shows the general work-flow. m5board.com is your friend for torque specs and pro…
){kind=link}
BavAuto BLOG ARTICLE: http://blog.bavauto.com/15545 PARTS LIST: *Powerflex Urethane Bushing Kits: http://www.bavauto.com/se1.asp?dept_id=5403 * Liqui-Moly An…
){kind=link}
This is not a step-by-step DIY. There are a lot of procedures excluded; this shows the general work-flow. M5Board.com is your friend for torque specs and pro. This is not a step-by-step…
){kind=link}
This is not a step-by-step DIY. There are a lot of procedures excluded; this shows the general work-flow. M5Board.com is your friend for torque specs and pro. On this episode of Tech Tip…
){kind=link}
Powerflex has launched full car set for Peugeot 206 including Front Arm Front Bush, Front Arm Rear Bush, Front Anti Roll Bar to Chassis Bush 20mm and 22mm, R…
){kind=link}
This is not a step-by-step DIY. There are a lot of procedures excluded; this shows the general work-flow. M5Board.com is your friend for torque specs and pro…
){kind=link}
This is a D.I.Y vid on changing out the control arm bushings on a e36. This is probably a 2 out of 10 on difficulty and it’s a must do for any aging bmw. i’v…
')){kind=link}