How to replace springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]

How to replace springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]

How to replace springs / coil springs / suspension springs on SUZUKI SWIFT 3 (MZ, EZ) Hatchback 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 [TUTORIAL AUTODOC]

Top brands that produce springs: BLUE PRINT, KYB, MONROE, LESJÖFORS, SACHS.

Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036709825?pid=Youtube

On our website you will find a wide range of auto parts you are interested in: https://goo.gl/2uEHSC
Springs: https://goo.gl/kxNHVS
Springs for SUZUKI: https://goo.gl/kMxKVY
Springs for SUZUKI SWIFT 3: https://goo.gl/aX4jGR
SUZUKI Car parts: https://goo.gl/YBAhfD

🔔 Subscribe to AUTODOC’s channel and don’t miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?sub_confirmation=1

PDF How to replace springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC] — https://cdn.autodoc.de/uploads/man_pdf/suzuki/swift-3/front-suspension-springs/EN-How-to-replace-front-suspension-springs-on-Suzuki-Swift-3.pdf

00:21 — Use a combination spanner No.16. Use a drive socket No.15. Unscrew the stabilizer link upper fastening.
00:38 — Use a flat screwdriver. Disconnect the ABS sensor cable fastener.
00:44 — Use a drive socket No.12. Use a Ratchet wrench. Disconnect the brake hose holder from the shock absorber strut.
01:04 — Use a combination spanner No.17. Use a drive socket No.21. Unscrew the lower fastener of the shock absorber strut.
01:25 — Disconnect the steering knuckle from the shock absorber strut.
01:36 — Use a flat screwdriver. Unscrew fixing bolts of the protective cover.
01:58 — Use a combination spanner No.18. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount.
02:27 — Use a combination spanner No.19. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount.
03:00 — Install the spring on the shock absorber.
03:10 — Compress the spring.
03:33 — Use a combination spanner No.19. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount.
03:58 — Tighten the shock strut top mount. Use a combination spanner No.17. Use a HEX bit No.H6.
04:33 — Install the steering knuckle on the shock strut and tighten it. Use a combination spanner No.17. Use a drive socket No.21.
05:03 — Connect the brake hose fastener to the shock absorber strut. Use a drive socket No.12. Use a ratchet wrench.
05:11 — Connect the ABS sensor cable fastener.
05:23 — Tighten the stabilizer link upper fastening. Use a combination spanner No.16 Use a drive socket No.15.

The tools you need to replace springs:
– combination spanner No. 16
– drive socket No. 15
– drive socket No. 12
– ratchet wrench
– combination spanner No. 17
– drive socket No. 21
– flat screwdriver
– combination spanner No. 18
– HEX bit No.6
– combination spanner No. 19

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► SUZUKI SWIFT 3 car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxnVRMGGMAq4zJ8shWlqQZpI
► How to replace front brake discs and front brake pads set on SUZUKI SWIFT 3 — https://youtu.be/aTFOJcc11ws
► How to replace front anti roll bar link on SUZUKI SWIFT 3 Hatchback — https://youtu.be/ZgH4_yu2ZP0

Mobile Shop: https://m.autodoc.co.uk

📲 AutoDoc in social media:
Facebook: https://www.facebook.com/autodoc.co.uk
Twitter: https://twitter.com/autodoc_berlin
YouTube: https://www.youtube.com/c/AutodocUk
Instagram: https://www.instagram.com/autodoc_autoparts

#autodoc #autodoctutorial

Disclaimer:
This video contains only tips and recommendations that can be useful to you in the course of car repair or replacement. AutoDoc shall not be liable for any harm, injury or property damage got in the process of repair and replacement due to incorrect use or misinterpretation of the given information. This video is for guidance only and does not guarantee a specific outcome. The user is personally liable for .incorrect or hazardous use of repair equipment, instruments or car parts. AutoDoc highly recommends to be careful and follow the safety rules during repair and replacement works. Keep in mind that exploitation of low quality auto parts does not guarantee the adequate level of road safety.

1,691
Like
Save


Comments

autodoc.co.uk says:

00:21 — Use a combination spanner No.16. Use a drive socket No.15. Unscrew the stabilizer link upper fastening.
00:38 — Use a flat screwdriver. Disconnect the ABS sensor cable fastener.
00:44 — Use a drive socket No.12. Use a Ratchet wrench. Disconnect the brake hose holder from the shock absorber strut.
01:04 — Use a combination spanner No.17. Use a drive socket No.21. Unscrew the lower fastener of the shock absorber strut.
01:25 — Disconnect the steering knuckle from the shock absorber strut.
01:36 — Use a flat screwdriver. Unscrew fixing bolts of the protective cover.
01:58 — Use a combination spanner No.18. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount.
02:27 — Use a combination spanner No.19. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount.
03:00 — Install the spring on the shock absorber.
03:10 — Compress the spring.
03:33 — Use a combination spanner No.19. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount.
03:58 — Tighten the shock strut top mount. Use a combination spanner No.17. Use a HEX bit No.H6.
04:33 — Install the steering knuckle on the shock strut and tighten it. Use a combination spanner No.17. Use a drive socket No.21.
05:03 — Connect the brake hose fastener to the shock absorber strut. Use a drive socket No.12. Use a ratchet wrench.
05:11 — Connect the ABS sensor cable fastener.
05:23 — Tighten the stabilizer link upper fastening. Use a combination spanner No.16 Use a drive socket No.15.

The tools you need to replace springs:
– combination spanner No. 16
– drive socket No. 15
– drive socket No. 12
– ratchet wrench
– combination spanner No. 17
– drive socket No. 21
– flat screwdriver
– combination spanner No. 18
– HEX bit No.6
– combination spanner No. 19

Restore It says:

Hey guys, Get in contact with me. I'm buying parts from AutoDoc all the time and would love you as a channel sponsor.

Write a comment

*