How to Install a Stereo into a Subaru Legacy/Outback (2003-2009)

How to Install a Stereo into a Subaru Legacy/Outback (2003-2009)

Check out My Facebook Page(s):
https://www.facebook.com/CarAudi0etc/ – My Car Audio Page
https://www.facebook.com/GoProetc-155… – My GoPro Page
https://www.facebook.com/JamesAndCo.etc/ – My Vlogging page
https://www.facebook.com/AutoSoundand… – My Work Page

96,627
Like
Save


Comments

alex chalupa says:

Missing something here… did install. Have illumination to factory stereo with zero power to climate controls… all illuminated tho.. what am I missing???

Lewis sPur says:

Is anyone able to explain why the open part of the dash without the stereo or anything looks different than on my legacy? Mines stock from 2004.

Rafael Vega says:

Hi, did you modify something for the radio to fit?

Earl Holcomb says:

So I went off your video on my 2006 legacy gt and the head unit works fine but my hvac doesn't light up and I can't control it but it blows full blast. Did I mess it up? Or did I just switch the 2 plugs for the hvac? Any info would be helpful thanks

VivaLaFiesta says:

Would i be able to do this by just getting the navigation bezel?

Eduardo Sandoval says:

Where can I order a set I been waiting to do this to my outback

Avery Foster says:

Question: is there a way to…umm damn,i dunno how word it.
Can both 'new' flat screen and 'old' CD/radio be connected into the car speaker's?

Jorgenese says:

Hey I have a 2005 Subaru outback and I'm trying to find a bracket mount for a single din stereo. I'm putting it in the same area where the pocket panel was located, but I can't find a bracket for it. On the back side there's a part number that says Radio Box 66204AG02A. I've searched everywhere and I can't find anything that's related to the part number or even something that could work in the car. Do you have any advice or know about a bracket that'll work for this?

Taylin Eckols says:

I have a 2002 Subaru Legacy B4 (Japan). It has a navigation+HVAC head unit and a Aftermarket Kenwood head unit below it installed (previous owner). The nav unit does not turn on but the aftermarket unit works. Was wondering if they just pulled the wiring harness from the nav unit and put it into the new one? If so how do I fix it so both units will turn on/work?

Mrbigolnuts says:

Thanks but would have love to seen you dismantle that console

Jack Hewitt-Dutton says:

I have bought part for double din between air vents. Any support on how to install unit in there. I think I need brackets so that double din unit can fit in there.

Michael Claveau says:

Hi does anyone know i installed one in the top, but when putting it back together i lost the back illumination on the factory radio and climate control so the words and knobs dont light up red anymore. I don't think its the fuse since it still lights up red around my side mirror controls. Thanks i have a 2005 Subaru Outback Limited. So the screens light up with temperature and radio station, but the illumination is gone. Does anyone have a wiring schematic for aftermarket to climate control. Not sure which wire would be related to the red back illumination.

Boxer Tech Garage says:

Anyone looking for this bracket, the OEM part number is 66060AG041

samuel chwiedacz says:

Hi There I have a subaru legacy BL5 twin turbo can I do The same cd player stereo in The some pace like this one because on the other video you said you have to do in the lower place with the air conditioning and so on.
Many thanks.

Omertà says:

Is that the OEM center dash? Did you cut anything like the opening face?

Elvis Zhirzhan says:

Does a double din fit in there? Atoto A6 Pro

Taavi Ansper says:

Hey, is that bracket in the newer 2007 Europe version Subarus aswell, if I had the flap compartment up there?

Nigel Musster says:

Looking for a Navigation trim panel for a neckless dounle din conversation, any leads or links to find a trim panel..

Steve RetiredandCranky says:

I will never forgive Subaru for this stereo/temp control abortion.

Achala Samarasekara says:

Hey dude, nice work on this. I think I'll do the same. Do you sell a wiring loom or know what brand/part number I can get in NZ to adapt the factory 2007 Legacy stereo to an aftermarket headunit? Can't seem to find an Aerpro one… Thank you

javier martinez says:

Hello, very good video, I do not use much English, so I did not understand your words, so I consult you, how did you do to handle the audio of the new radio, from the steering wheel controls? I have a 2008 outback and it does not bring auxiliary input. Thank you

Jason Tanuvasa says:

Can you help me out bro…. like how did you take the frames out first? And awesome video mah’man

70X1C S1NC3R3 says:

Much cheaper option.lol

70X1C S1NC3R3 says:

Thanks man. This vid helped me install my stereo in my subie.

Comments are disabled for this post.