A DIY video tutorial on how to program a new key to a 2005 – 2007 Saturn Relay.
This procedure is for when all keys are lost for your Relay. If you just need to add a key, you can find that video HERE https://youtu.be/L-GDMbNnFrc
More free key programming instructions available at https://www.ProgramAutoKeys.com
Remote programming instructions available at https://www.ProgramYourRemote.com
1. Insert a new cut chip key in ignition and turn key to the ON position for 10 minutes and 30 seconds.
2. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
3. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
4. Turn key OFF then back ON. The key is now programmed. Start vehicle to test key.
This procedure will program a new transponder ignition key to following Saturn models:
2005 Saturn Relay
2006 Saturn Relay
2007 Saturn Relay
What if the key loght on dashboard does not off will it program
How do i erase the old keys i changed new ones wont start
What if the light doesn't shut off after 10 minutes?
I had a new key programmed. Now the anti theft light is on.