1995 Oldsmobile Cutlass Ciera Brake and Rotor Repair

1995 Oldsmobile Cutlass Ciera Brake and Rotor Repair

http://www.apdty.com/ Click the above link to find the brakes for your vehicle. In this video we’ll show you how to replace the brakes and rotors on a 1995 O…

40
Like
Save


Comments

pyropup55 says:

You wouldn’t happen to have a video on how to replace the window motor in the same car would you?

APDTY says:

Hi, Unfortunately we do not have that particular video at this time.

King Lion says:

Hi every one
Is there any video show how to replace the Front mainframe rubber for the 1990 CIERA

GodofThunder66 says:

didnt even spray off the caliper and rotor off with brake cleaner to get all that uest off of them..

Randall Bott says:

u should wear a breathing mask wen doin that to asbestos is bad

William Mann says:

I can’t believe how easy this was! Thanks for saving me from the $350-$400 labor cost Tires Plus was quoting.

zachary yount says:

need some help removing and replacing harmonic balancer on 90 cutlass ciera 3.3 v6

hp11208 says:

i have a jack like that.

Chris Schulz says:

This car has drum brakes on the rear, however, they don’t appear to be difficult to work with, as it is a simple set-up.

Nicholas Daw says:

was thinking the exact same thing while I was watching

Chris Schulz says:

I had to replace the brake pads and rotors on a 1996 Ciera and this helped a lot. In my case it was very difficult to remove the calipers, but it was easy once I got them off. The old pads were so thin, they dug down into the driver side rotor and scratched the passenger side rotor. Thanks for this video. I wouldn’t have been able to do it if I had not seen this.

APDTY says:

You are correct, and if I did not mention that in the video, I should have.

billyphx2001 says:

U should always take the cap of the master cylinder before compressing calipers to reduce ABS system damage…

hp11208 says:

is the rear brake pads,rotors,calipers hard to replace

APDTY says:

if the ABS light is coming on, that means there is a malfunction somewhere in the ABS system, you would have to have a scan tool that can communicate with the ABS system in the car to find out what the trouble code is. From there you can go and diagnose the system.

CtlasCiera95 says:

The ABS system requieres some adjust? Mi car gets the warning light ABS on after change the pads,all the sensors are conected, i dont know whats wrong, but the car brakes very well

Christopher Uhde says:

thank you =D
this makes it easy, i have a 93

Write a comment