my engine light is on with a code P0562 (system voltage low) after replacing the main battery. The new battery voltage is above 13V. With engine on, the voltage is above 14V. Engine starts normal. I tried to erase the code with my old scanner, but it would not clear. Everything is working normally. Do I need a mercedes scanner to reset?
Question? Do I need to reset after changing new battery. If not,I can do it my self. If reset required than I have to take to mercedes dear and it would be very expensive and I don't wanted that. Help please. Thanks.
Thank you so much my car is doing the exact same thing!
my engine light is on with a code P0562 (system voltage low) after replacing the main battery. The new battery voltage is above 13V. With engine on, the voltage is above 14V. Engine starts normal. I tried to erase the code with my old scanner, but it would not clear. Everything is working normally. Do I need a mercedes scanner to reset?
thank you good sir, just changed my battery based on your video. Very much appreciated.
There's actually an alternative battery for the eco/start / stop feature but the rest your right about
My top clamp on the ( – ve ) is really tight any suggesting on how to get it loose without damaging the port?
Question? Do I need to reset after changing new battery. If not,I can do it my self. If reset required than I have to take to mercedes dear and it would be very expensive and I don't wanted that. Help please. Thanks.
Great stepped instructions, Sir; thanks for sharing.
do you need an extra 12 volt battery attached to the battery terminals before removing the battery to prevent computer from resetting? Thanks.