DIY Custom Diffuser from Foam and Fiberglass | Infiniti G35

DIY Custom Diffuser from Foam and Fiberglass | Infiniti G35

Making a custom aggressive rear diffuser from expanding foam, fiberglass and plexiglass.

Instagram: https://www.instagram.com/vikoo35/
Gaming Channel: https://www.youtube.com/c/VIK7ORIO

656,972
Like
Save


Comments

Kayute says:

Serious question, after the few months that have gone by now, have you noticed any imperfections in the paint?

Мирослав Кирев says:

Браво, страхотна работа! Респект!

Joe Sweeney says:

Good job the only thing I'd have done different is cover the entire lower section of the bumper in masking tape prior to the foam stage pushing the tape flush into the shape of the bumper.this would have allowed you to seperate the splitter from the bumper once you had it glassed. The foam can then be removed and the splitter would be a seperate piece to the bumper rather than 1 whole piece

Serj Shvediuk says:

Красиво добротно получилось. Но к задней части снизу кузова и по открытым задним аркам при движении свыше 80-90-100 км/ час повышенные требования по успокоению воздушных потоков. Которые увеличивают сопротивление движению автомобиля. Снизу от половины кузова до конца его дно должно быть гладким , возможно с продольными рёбрами до конца задних. Если рассматривать улучшение аэродинмики такого красивого кузова как в вашем авто.

dan tha man says:

you gotta take it off make a mold of it and sell em !

awang hejo says:

Mantap, Bro.

Mohammed Tahir says:

If this is your first time, imagine the results next time!!! Awesome.

Alexander G says:

Did you remove the foam or just leave it?

Gary Wong says:

Turned out really nice!

M Ch says:

Great craftmanship, turned out awesome, well done

Djustice says:

that was amazing

Jalopy247 says:

Why do this?

The Millennial Rider says:

So the DIY diffuser is mounted(stuck) on the stock bumper only by adhesion of the expanding PU foam right? or did u use anything else too?

Lord of Waffles says:

I saw the spray foam and I was like "nah" then I saw the fiberglass and I was thinking okay, then I wondered how it was a diffuser without the fins, then you brought it all together with the plexiglass and I was convinced. This is fantastic! Super great job

ЕпатьСуперВатник Я says:

Японцы бы палкой по голове дали этому рукожопу

MrMarineMaster says:

Such a nice job man! Great job❤

Emiliano Rojas says:

Muy buen trabajo

Comments are disabled for this post.