Used to do this at a junkyard body shop. Except we would use old license plates and rivets. It worked great considering they were used cars and had already been repossessed. The trick is to countersink the outside for the rivet to fit. Grind it and wipe it with filler. Also gotta “V” out the crack.
I didn’t agree with doing it that way, but it cached up perfect for the next person to buy and not make payments lol
){kind=link}
Called fill putty and match paint spray
What’s even funnier is I got paid to do that
It looks like drywall screws
Just cut off on the front side and body filler to cover,
Does work, give them credit for that
They screwed it, then cut it flush on the front of the bumper and bondoed over it
I call black mans Mercedes!! Sounds racist but it’s not!!
Used to do this at a junkyard body shop. Except we would use old license plates and rivets. It worked great considering they were used cars and had already been repossessed. The trick is to countersink the outside for the rivet to fit. Grind it and wipe it with filler. Also gotta “V” out the crack.
I didn’t agree with doing it that way, but it cached up perfect for the next person to buy and not make payments lol
Wood screws are square heads, commonly #2. They provide more torque when driving a screw into a piece of lumber.
That sir is a #2 Phillips head commonly used for drywall screws. Designed to slip off once it is tight enough.
Looks like plaster screws to me
I’m flabbergasted how well that turned out
Cause they cut them off smooth on the other side. Duh.
Actually really impressive, a lot of guys would pay to know how that was done