Made with Film Maker
https://play.google.com/store/apps/details?id=com.cerdillac.filmmaker
music by audionautix.com
Kia & Hyundai Replace Front Brake pads and rotors , 20 minutes
214,247
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
Instead of washing off the rust behind rotor with break cleaner use rotary wire brush and put some anti rust grease.
Be careful when you decide to use this or similar tutorial at home. After replacing old brake pads, you must immediately do the air bleed from the brake system. In the newest cars, the air bleed valves are based on the vacuum principle, so you must use a vacuum pump for air bleeding.
A vacuum pump with a brake fluid tank and air bleed valve creates a closed circuit, which eliminates the air bubbles in the system.
Straznie dużo rdzy na zaciskach jakby auto w wodzie stało
Kuiujohjmkuukyrdfdd
Ya que desarma las piezas debería de limpiarlas para que se mire mejor el trabajo
O.K. – i like it . And at the end of the work CHECK LEVEL of the BRAKE FLUID .
2007 santa fe included?
Do u repeat on the other side b4 pumping brake pedal and replacing the resivour cap ?
Did he bleed brakes or need to?
You should invest in a torque wrench. Good video nonetheless.
Thank you !
Excellent job, the only thing that i would do extra is clean the pieces that are rusty, it is very excessive. Thank you
Excellent job. It's getting so hard to find a decent mechanic I'm thinking about fixing the brakes on my wife's i30 myself.
is this the same process for the kia K5 ?
Nice job. If you wire brush the hub before trying to get the brake disc off it can make it easier to get the disc off.
I wouldn’t use anything on a socket wrench to tighten up the carrier bolts because next time you come to undo them will be more difficult…
What did you spray?
You did not remove the bungy cord you used to hang the caliper. Excellent video…I love the way you do it
You get that bungee cord you used for the caliper?