http://www.xenonsupply.com/hyundai-accent-hid-xenon-kit.html How to Install Xenon HID Conversion Kit on a 2012 Hyundai Accent. Improve the look of your Accen…
http://www.xenonsupply.com/hyundai-accent-hid-xenon-kit.html How to Install Xenon HID Conversion Kit on a 2012 Hyundai Accent. Improve the look of your Accen…
You must be logged in to post a comment.
){kind=link}
can you suggest a better way to seal that dust cover? a rubber grommet? or silicon seal? what do you suggest?
its 8000k or what ?
GOOD VIDEO
TOPHIDXENON@GMAIL.COM HID MANUFACTURE
what about those whole u made in the plastic cover of the H4 how can we cover them ? can u give us some suggestion? please 😀
Do you have a vid of this process for a 2010 Hyundai tucson?
hello how are you, I want to install xenon lights in the fog of a Hyundai Accent 2012, my question is: I have to use a relay or directly do the lights socket
thanks
What is the music playing on?
how much did this kit cost?
I drive a 13′ Veloster. And driving at night you can see the cut off line, the driver side cut off line is shorter than the passenger side. Hid’s are alright on new cars, but putting HID’s in a old ford with square lights are a no no..
Sorry but I’ve never heard about it and every time I see one it looks like they driving with they high beams on.
HIDs are approved only for the projector (and not all of them) type headlamps because these are the only type of headlights with that dramatic cut off line.
What about this one then? wCVJD1lV7LI
No not on these new cars. The multi reflectance headlights that come on new cars channel light just like a projector would. If you don’t believe me point your new Hyundai or any new car to a wall and turn on it’s lights. The light is controlled.
Do a video on the fog lights , !!!
I’m sorry buddy but installing HIDs into the regular headlights is simply stupid. HIDs should be installed ONLY in the projector type headlights otherwise all you do is blinding oncoming traffic. Poor piss performance!
Incredible video my man…very professional. This really helped me out a lot
thanks man
happened on my friends mustang but you do not notice very much. We live in CA so there is not a whole lot of humidity to get in there in the first place
I’ve been told by a few people that it was a bad idea to install HIDs because of the fact that if you don’t have a perfect seal on your headlight casing, you will get humidity in there, cause condensation, etc. I see that you drilled through the dust cover and mention that you can seal with electric tape, but my question is, does it have to be a perfect seal, or just good enough that you don’t get dust, and humidity will escape on its own?
yes youll need a relay harness for this install the relay will come with your high/low HID kit
do you need a relay kit for this?
explain more please
I want use this on my car
I have Accent 2012
I’m from Saudi Arabia
Hello @XenonSupply. I have an Accent 2012, I want to install this HID kit, but as per some hyundai forums, there is some mith about installing HID to it will burn light bulb interior (aka reflector) and it will turn bulb darker (like burned), could you confirm if a 35W will do this with a proper installation, thanks.
Hello, I want to know how much are those HID xenon.
If you have projector headlights it is not because the projector is made for focus the light accurately for excellent dispersion of the light. If you have reflector headlights you may need to align them and for both headlights (projector and reflector), you need to have electronic leveling headlights.
is it legal and not too bright to make other drivers blind?
@xenonsupply, is the same procedure for a 2009 Hyundai accent?
ي غالي هل طلبت منهم
افدني لا هنت
مشكور
How about the fog lights are those HID`s I want this set but if I get them I want the fog lights to match.
i have the same car. I want to install side-view-mirrors blinkers, like the other 2012 models. I’ve been searching but the car is too new for aftermarkets!!! I tried e-bay but like i said, this car is too new for aftermarkets.
i want to install a single orange halo on each side of the headlights, as well as the daylight strips. :).
any one know where to get good aftermarket parts for the specific car?
Nice Snap-On 🙂
@Toyota4Runner4Ever The Standard ballasts are water resistant with pressurized plates and an epoxy filled interior. The Premium ballasts upgrades available are complete waterproof ballasts with rubber seals.
Send us an email at Help(at)XenonSupply(dot)com for more info on the best kit for your vehicle.
-XS Team