Buy Now!
New Windshield Wiper Transmission from 1AAuto.com http://1aau.to/ia/1AWWT00158
1A Auto shows you how to repair, install, fix, change or replace a broken, bent, damaged, failing or squeaking windshield wiper transmission. This video is applicable to the 04, 05, 06, 07, 08 Ford F150.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oPb/1AXAA00013
• 7mm Socket http://1aau.to/oBN/1AXAA00017
• 8mm Socket http://1aau.to/oBN/1AXAA00017
• Ratchet http://1aau.to/oPY/1AXAA00016
For More Info visit us at http://1aau.to/h/ath/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
I tried this. It went smooth until the transmission I got fromO Reillys didn't fit. The arm that bolts onto the motor had a round hole in it and my motor has a round output axle. All their listings showed round holes in the arm. Not good
Thanks amigos por sus videos me han servido mucho
You guys are great, should have watched your video first instead of struggling to figure it out while freezing my fingers off. Thanks
Great instructions. I followed the steps and replaced the wiper transmission with no problems.
Will this fix the water front not spraying out? Wipers on front and back still work just get no water and I do not hear any hummi g coming from motor.
ford expedition front wipermotor
how to replace 2001 front wiper motor someone knows?
Brothers, I need your help. I have a 1997,f 250. 7lug, 5.4 V8, we replaced the 4 plastic bushings on the wiper Arm, the assembly was a pain in the butt to snake out, and now to try to get it back in ,The arms / wiper assembly seems to keep jamming up Inside ,against In pan, cal assembly ,Fellas, what's The trick help out an old brother, to get That assembly Back in there ,and rotated It/ arm assembly Is rubbing inside that Cal box.Keeps jamming up.Thanks for For the help guys..
How do you do this on an 08 expedition? There is a piece of sheet metal underneath the plastic trim that is preventing me from removing the wiper an transmission assembly.
Is the process the same for replacing the wiper motor on a 2002 ford f150?
This video helped out a lot, thanks!