https://www.1aauto.com/brake-light-switch/i/1azmx00239?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=ZfNk947lqYI
1A Auto shows you how to repair, install, fix, change or replace a broken, shorted, stuck, or malfunctioning brake light pedal switch. This video is applicable to the 04, 05, 06, 07, 08 Ford F150 pickup truck.
🔧 Instructions:
1. Removing the Brake Light Switch 0:34
2. Installing the Brake Light Switch 1:03
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Dose anyone know what could make my truck cut off
It cuts off when i push the brakes i changed the brake switch but when i move the the plug it cut off the truck even when i push the brakes can someone please give i idea its a 2002 f250 super duty
Thank you very much for your video. It helped me understand how to do it myself I followed the video step by step and the procedure is identical for my 2004 Expedition. Thank you for your extremely detailed and helpful video, I sincerely appreciate it.
This was a huge help! I have a 2004 Ford Explorer. I checked on their website and other auto parts stores around me, and none of them had this exact replacement for my vehicle. I had to end up cutting the wires so I could use the new adapter. It wasn't too difficult. This video was spot on to get me to that point. Thanks!
Just wanted to say thanks for the video. I was able to easily follow your direction, get my brake light switch changed out myself and I'm back up and running!
Ok my tail light brake don t work but my cargo lamp brake work, can it still be the switch or van it be something else??
Thanks! Just replaced mine in my 2004 F150 STX, worked perfect! My brake lights have been going in and out for weeks.
HI, my reverse lights don't work when I put it in reverse. My backup sensors don't work aswell, I'm assuming they work together. What can the problem be? Thanks 2005 ford f150 2wd
Excellent. Fixed my 2003 F-150.
Thank you!, It is the same procedure on my Explorer 2004. Now to hunt for the replacement, it is expensive here in Mexico.
I have an 2004 F150 and only the driver side brake lights are working, both braking and turn signals. I replaced the passenger side brake bulb, and it didn't fix it. Then i replaced the fuse on #36, still didn't fix it. I'm left without a clue. Will this switch fix cause only 1 side to stop functioning, or would it be both? Thanks
Thank you, very helpful, very much appreciated. I used this video to change my stop light switch today on my Expedition. Thanks again, Gabe
This video was very helpful with replacing the switch. However, after installing the switch I have encountered a thud noise along with a shaky feeling. When I put the original switch in all of this goes away, but the brake lights don't work. Do you have any idea?
I'm guessing a 94 Ford Taurus should have the switch in the same location? thanks
what about on a 2002 ford mustang v6?? please help
question sir, I have a 2004 Chevy suburban, and my brake lights stayed on which in part drained my battery. my daughter thought it was my alarm going off, being that it's sensitive… when I came out the next morning my truck wouldn't start nor could I get the doors to open via alarm… I'm going to get the alarm serviced, but do you think it went dead due to brake light switch staying on all night. I have to walk back and check to make sure they're not stuck and if it is I usually tap the brake pedal until it goes off… thanks I'll wait for your reply
Any idea why a 3rd brake light is inop but the tail light brake lights work? On a 04 f150 super crew XLT
thanks man helped a lot
the brake light switch installed from the factory on my truck (2004 f150 new body-style) has a 6-pin connection. what are the additional two pins for, and would i be okay installing this 4-pin connector? If it matters at all, I do have the trailer towing package.
Thanks guys!
Will this work on the 2003 F150 trucks?
man thank you, this was really helpful
I need to replace the stop light switch on my MKZ…same process?
hope this helps me fix my problem with my ford bronco my break light , it won't turn off . thanks
Would this be the same for a 2007 ford expedition