Dan and Rachel show the steps to replace the clutch (pressure plate, clutch disc, throw-out/release bearing and pilot bearing) on a Ford 2000 Series 3 Cyl 65-74, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 3000 Series 3 Cyl 65-74, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3550 Indust/Const, 3600, 3600N, 3600V, 3610, 4000 Series 3 Cyl 65-74, 4110, 530A, 531 (and more!) tractors.
Order parts here: https://farmtractorrepair.com/collections/clutch-ford-2000-3000-4000-5000/Ford-3000-Clutch
Watch the single-stage 9″ or 10″ clutch tutorial here: https://www.youtube.com/watch?v=_L1otR40AXA
Follow Rachel on Facebook: www.Facebook.com/tractorrachel
Follow J&D Productions on Instagram: www.Instagram.com/janddproductionsinc
The producers of this free tutorial do not assume any responsibility for accidental injury, death or dismemberment resulting from the performance of any orations detailed in this tutorial. Please be aware of common safety steps–expressed, implied or not expressed.
){kind=link}
Where is the oil filter located for the power steering on a 1969 2000 ford farm tractor?
By the look of that bell housing I would have checked the crankshaft rear oil seal.
Supprised you had gasoline or petrol engines so late.1970s. In the UK these were too expensive to use.
Great video lots of good information. The coil springs are Cushion springs that cushion the engagement. You didn't mention the Marcel spring that fiber friction clutch discs have
before removing clutch pressure plate, measure the finger hieght of inner tips of fingers. Installing throw out bearing, push on the inner race of bearing and use the retainer spring on fork to bearing so keep the bearing form engageing when foot is off pedal. props to rest of video
I found the numbers but I’m not sure how to read them
It looks like the one you are working on the clutch
How do I tell what model and year my ford tractor is it’s blue with a square hood
A couple things the video doesn't mention, unless I missed it is clutch finger adjustment, or measuring runout on the flywheel. Also, if your going to go through the arduous task of splitting a tractor of this age it would probably be a good idea to replace the rear main seal too. Good video however thanks.
Dear Miss Gingell 65 4000 pto won t disengage any thoughts?
This girl is a dream come true.
I am from Pakistan love ford tractor I like very much