Buy Now!
New Idle Air Control Valve from 1AAuto.com http://1aau.to/ia/1AISC00007
In the video, 1A Auto shows how to remove and replace a clogged, stuck, failing, shorted, or malfunctioning idle air control valve. The video is applicable to the 94, 95, 96, 97, 98, 99, 00, 01, 02, Dodge Ram.
🔧 List of tools used:
• 8mm Socket http://1aau.to/o4h/1AXAA00017
• T25 Socket http://1aau.to/otI/1AXAA00008
• Ratchet http://1aau.to/oatC/1AXAA00016
• Socket Extensions http://1aau.to/oabX/1AXAA00015
For More Info visit us at http://1aau.to/h/bRU/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
My 02 ram stays on only when accelerating but when I let go of the gas pedal it dies ,any advice on what could be wrong??
I had the P0505 code and I'm still having the same problem
I had low idle issues and replaced this now the truck idles high and when i put it in park idles even higher what would be my next thing to do?
This was such an informative video. I fixed this part on my truck, and it runs in idle so well! Now I have to figure out why it sputters when I’m driving sometimes and how to fix the ABS and Brake Light being on.
Hello guys I got a 99 Durango when I put it in drive and push the gas pedal my rpms jump up to 4 is that a bad sensor looking for some help only had the vehicle for a week now
What if the code still comes up after replacing it? Does it mean I bought a new bad one? I clear the code and instantly the check engine light comes back on but it does seem to be idling a lot better
Got this part installed and for some reason when I start my truck the rpms rev up to 1700 and then go back down to 600. Not sure what I need to do in order to fix it…
Videos very helpful my brother was about to spend $500 to take his truck to a shop this fixed it for $40
So I have a 98 dodge ram 1500 with 282K miles. When it idles it randomly revs up to 2K RPM. On the highway driving it will surge a few hundred RPMs and last week for the first time I was approaching a stop light and it just kinda sputtered and died out of nowhere. It hasn't done it again since then but it's strange. What do you think it could be?
This is helpful. Thank you!