I want to share this video about changing spark plugs and plenum gaskets on a 2005 Chrysler 300 2.7L v6 engine. I forgot to mention that you should change or…
I want to share this video about changing spark plugs and plenum gaskets on a 2005 Chrysler 300 2.7L v6 engine. I forgot to mention that you should change or…
You must be logged in to post a comment.
Hey budd, im trying to remove the intake manifold and the throttle body on my dodge charger 07 2.7liter and it looks exactly like this engine here to the teeth. @ 1:36 in your video the metal tube coming out from the throttle body, how did you get it out of there cause I dont see any screws or anything it just goes in there. This problem is starting to discourage me. Any advice?
Great video well detail
Just got around to changing my plugs on my ’08 charger.everything went smoothly thanks to your video.thanks a lot man.
ËGR valve please
Great video.big help.thanks.
This Video was great. I have chanaged all of the plugs and still have a misfire. I did see that one of the plugs came out with oil on it. Is this because I need to change the spark plug gasgets or is this a faulty head gasget. With the coil having so much oil built up on it should i have replaced. Would this affect the idle.
Make sure there is no air leaks at the plenum where the gaskets go. Do this by spraying carb cleaner around it and see if the engine will smooth out. If it does you might have misaligned the gasket or you don’t have the plenum tightened correctly. Also make sure all the electrical connectors are back in the right place and connected. One more thing is you may have gotten a bad spark plug but that’s rare.
Help I have slight vibration now that i changed the spark plug
nice jobs man.. unfortunately chryslers makes such pieces of shit.. i went through the same gasket problem as everyone who owns a chrysler went through…
Your welcome.
Thank you Sr. !!! thank you for the info, I was so nervous for remove the manifold, but whit you explication is so easy, you make me save a lot money !!!!.
Thank you Sr.
Thank you sir!!
Just changed spark plugs in my 2007 Chrysler 300 and video was on point. Instructions worked like a charm. My first time & Thank You Very Much. Took 2 hours total for me. Really Helped.
Thank you!
I GOT CHARGED $270.00 TO HAVE THIS FIXED BEFORE!!!! DAMN AUTO SHOPS… WITH THE RIGHT TOOLS SHOULD BE GOOD TO GO.!.!.!.!
DAMN GONNA CHANGE MY SPARK PLUG COIL TOMORROW,,THANK YOU FOR THIS VIDEO, THIS VIDEOS GONNA BE ALOT OF HELP,, THANK YOU ONCE AGAIN.!!!
Thanx for the info , I was a little nervous at first but it’s as simple as you explained . just one thing how do you remove the plastic piece with the hose attachment that sits under the cover on the far left corner ?
THANK YOU SIR!!!
This was very helpful!
Do you have a video on how to replace the EGR sensor??
Thx, you just saved me some money…
I had to pay 150$ to get this done :/ 🙁 ill do it my self next time
Thank you for your help
I hear ya. My son and I did the job for under 25.00.
Thx for the video! I have a 06 with a 3.5 that need changing, everything looks the same. Auto shop bastards want to charge me $570 bucks to do it!