Buy Now!
New Strut & Spring Assembly Set from 1AAuto.com http://1aau.to/ia/1ASSP01569
Loaded shock assemblies are a complete bolt-in package designed to install easily. You don’t need to worry about compressing springs, or specialty tools. TRQ loaded shocks and struts are designed to fit your vehicle, so after the job is done, you’ll never think about it again. This video shows you how to install a new TRQ loaded shock assembly into your 2012-15 Chevy Cruze.
• Check here for more videos on the 2008-16 Chevy Cruze: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8IctKLXfb5a8_9lCEU
This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 18mm Wrench
• 24mm Wrench
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 24mm Socket
• Torque Angle Gauge
• Locking Pliers http://1aau.to/oa/1AXAA00139
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• T35 Torx Socket
• T50 Socket http://1aau.to/oa/1AXAA00008
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• 15/16 Inch Wrench
• Rust Penetrant
• Floor Jack http://1aau.to/oa/1AXAA00068
• Grinder
• Hammer http://1aau.to/oa/1AXAA00091
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Chevy Cruze 2008-16 1st Gen: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8IctKLXfb5a8_9lCEUbWzS
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks, you make looks everything is to easy, I gone do it my self now. Thanks.
Are those two bolts that you reused the same as the other or are they different lengths/sizes?
This was a LOT more easy than I imagined. Thank you, you just saved me 500 dollars
They mount the tire and the strut that you see is the old one
Why, When putting on back the tire, I see the old shock and strut on??
Thanks TRQ replaced my struts, shocks and a wheel bearing in my Cruze with your parts and video.
Do I need an impact Wrench ? And also with this same process Work well with a 2016 or not?
if he is replacing the strut the sway bar link only has to be losing from the bottom of it not the top
He didn't mark it with paint.
Great video!! This seems way easier than I thought it would be.
Sent that nut to MAC Jesus!
I bought TRQ struts from partsgeek for my 2015 nissan versa note s and after installing and driving it for a week the top strut plate sticks off the car frame by several millimeters. How do I fix this?
Where can I get that special socket to take the nut off? At 48 seconds, I need this tool . Thanks
Do you know what the 2 bolts are called and the bottom of the Strut ? The ones with a spline on them .
Do you know what that plate on the top is calle
I have a 2014 chevy cruze lsand I wanted to know it i could have the car raised
Almost didn't notice that a different nut was used on the top strut mount on the install. Thanks though, this video was very helpful!!
Great video..thanks
Need to align after or since its not really adjustable no?
Did you replace the (sway bar?) link and I missed it?