60HP
The impeller on an outboard motor should be replaced every other year or 100 Hours. This is a critical maintenance component in order to keep the water pump system of your outboard boat motor operating correctly. This video is a step by step tutorial on how to replace the impeller/water pump on a 2004 mercury […]
){kind=link}
')){kind=link}
My 2006 mercury Bigfoot outboard 60hp was shutting down randomly on me and I didn’t know what it was until I had an alarm go off. I took apart the outboard. Rebuilt the water pump. Change my oil and added a new oil filter. Made sure my hose from the water pump was connected to […]
){kind=link}
Replacing spark plugs in your Mercury outboard boat motor is really quite easy. Swapping the spark plugs is something my 60HP Mercury requires at the 3-year, or 300-hour, mark. In my case, 3 years have passed so I performed the entire outboard motor service and made a quick video showing how to put new spark […]
')){kind=link}
In this video I demonstrate the removal a the lower unit followed by the replacement of the water pump. With this particular model engine there was the option for a standard or larger “bigfoot” lower unit which this on is.
){kind=link}
){kind=link}
How to install Vessel View Mobile hardware onto a Mercury Outboard, the short and simple way. I assume you know how to take the cover off of your engine. I did not see a short and simple, detailed video on the hardware installation, so I thought I would try to be help to the next […]
){kind=link}
Changing to a four blade prop on the Pro Guide V16WT with the Mercury 60 HP Fourstroke.
){kind=link}
In this video I show how to do a custom installation of the Vessel View module onto a 60hp Mercury EFI outboard. This module will connect the outboard information via blue tooth to your cell phone.
){kind=link}
Punca dan sebab dah jumpa…
')){kind=link}
Enjen bot Mercury 60hp rosak teruk, hilang kuasa dan enjin mati bila masuk gear… pencarian masalah bermula… dah beberapa minggu tak turun menangkap ikan.
){kind=link}
Removing Carburetors to take them to be rebuilt.
){kind=link}
I think I fixed my tilt problem on my 60HP Mercury Outboard. I ended up buffing the contacts in the relays and it worked.
){kind=link}