what does it take or how to fix cab leaning problem. Can be fixed with rubber mounts or metal p#20727214
If your cab is leaning more then what I show on the video make sure to check the front cab mounts they are more then likely need to be replaced
As always safety first l
Make sure to follow safety precautions engine off. Brakes applied and blocked tires.
Please subscribe that will help me make more videos
What is that bracket called and where can I get that bracket thank you sir
Where did you them buy from Volvo dealer
I was losing my mind trying to figure this out! Thank you! I’m also facing another problem , antifreeze coming out the hose on the expansion tank. Also has lots of pressure , if I don’t keep it full it shuts my truck off going uphill. When I pull over and open the hood I notice the antifreeze level is down so I open the cap and it goes back up once the gasses start coming out. I don’t get it
Hello there. Do you have a video on replacing Volvo cab bracket with robber bushings ? My rubber bushings have spacers… I don't know if they come with spacers from factory but i bought the pear to install I also bought both front shocks cuz i have a rattle. But the rubber bushing spacers on passenger side one of them is very loose and i think i found the rattling noise. Should i add another spacer ? Or should i tightened the bolt to see if the rattling goes away ?
Thank you in ADVANCE.
Thanku great video solid info
Great video thx !
How does this braket hold ? Didn't brake something , snap welds ? I purchased the brakets , but I've told not to use them on my 780 because was designed to sway, on bushings, too heavy for rigid light daycab bracket. I had this hole cab suspension beam snapped on last truck, the weld from cab structure, was hard to weld it back.
Thank you! Very informative!
Great info. Thank you