How to Replace Turn Signal Bulb 00-07 Volvo V70

How to Replace Turn Signal Bulb 00-07 Volvo V70

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/268/x/parking-lights

In this video, 1A Auto shows how to replace the turn signal bulb. The video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70

🔧 List of tools used:
• 10mm Socket http://1aau.to/onH/1AXAA00017
• 12mm Socket http://1aau.to/oqa/1AXAA00015
• 8mm Socket http://1aau.to/onH/1AXAA00017
• Trim Tool Set http://1aau.to/odm/1AXXX00004
• T20 Driver http://1aau.to/oek/1AXAA00008
• T25 Driver http://1aau.to/oek/1AXAA00008
• Ratchet http://1aau.to/oub/1AXAA00016

For More Info visit us at http://1aau.to/h/Q7/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

15,162
Like
Save


Comments

1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
Do it Yourself
Save Money

Gregory Hird says:

A journey indeed; deep into the most egregious design flaw of P2. No sane reason to require this much work for a turn signal bulb replacement….. Whom to blame? Volvo? Ford?

ComfortablyNumbCo says:

Undo screw holding washer bottle neck, lift out washer bottle neck, pop out connector on back of bulb holder, turn holder anti/counter clockwise to remove holder and bulb….3 min job…(do the same with the airbox if changing the bulb on the other side)….take off the whole front of the car my arse!!!.

ComfortablyNumbCo says:

What a load of cobblers …"remove full engine" to change bulb????

Roger Tellefsen says:

You may not need to remove the bumper to change the turn signal bulb, but what a great video it is to see how to remove the bumper, adjust the headlight wipers, reattach trim, and get access to the headlight module.

MutieThePig says:

This is ridiculous. You DO NOT need to do this to change the indicator bulb.

Diana Burghduf says:

Every bulb is bitch to change on these cars.I like the car, but hate working on it.

Victoria Gorman says:

Good video but totally unnecessary. Both these bulbs can be changed from the engine bay. Unclip the airbox one side and the remove the washer bottle tube the other to give yourself enough space. No need to dismantle the bumper.

Comments are disabled for this post.