How to Replace Passenger Side Axle 00-07 Volvo V70

How to Replace Passenger Side Axle 00-07 Volvo V70

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/84/M/axles-and-axleshafts

In the video, 1A Auto shows how to replace a passenger side axle. The video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70.

🔧 List of tools used:
• Pry Bar http://1aau.to/teT/1AXAA00020
• 12mm Socket http://1aau.to/t77/1AXAA00015
• 14mm Socket http://1aau.to/t77/1AXAA00015
• 18mm Socket http://1aau.to/toU/1AXAA00043
• 19mm Socket http://1aau.to/toU/1AXAA00043
• 21mm Socket http://1aau.to/toU/1AXAA00043
• 1/2 Inch Breaker Bar http://1aau.to/thF/1AXAA00078
• Ratchet http://1aau.to/tZU/1AXAA00016
• Socket Extensions http://1aau.to/t77/1AXAA00015
• Torque Wrench http://1aau.to/tqD/1AXAA00044
• Center Punch http://1aau.to/tcc/1AXAA00055
• Floor Jack http://1aau.to/trq/1AXAA00068
• Hammer http://1aau.to/tiW/1AXAA00091
• Jack Stands http://1aau.to/trN/1AXAA00065

For More Info visit us at http://1aau.to/h/a5a/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

14,156
Like
Save


Comments

Ryōan Nazuk says:

Just did this job, took me about 1-2 hours, I used the parts I ordered from 1A Auto, which is the TRQ quick struts. The ride is much better now, solid and no rattling noise over bumps. Thank you 1A for the video, the quality parts at a good price and the fast shipping!

Bror Jonsson says:

Really good video! I Will change mine tomorrow following this instructions

Raul Romo says:

Excellent video, i have never done an alignment after replace axles, but, i might have to after watching this. better to be safe than sorry.

Jamer Heasley says:

Do you need to do an alignment after messing with the strut bolts as part of the axel replacement?

major 007 says:

great video thanks

james ponder says:

I totally would have taken auto shop in High school if she was my teacher

Mario Lemoine says:

Very good. simple explanation easy to understand. nice about
telling the torque specs

KENNETH O'DONNELL says:

Great video. Have one question, I was told if the center axle bolt was removed it had to be replace with a new one because the old one had been stretched…true?

Steve Hudson says:

What is the brand and model number of that electronic torque wrench?

matthew kühl says:

Support the knuckle!!! The brake hose and speed sensor cables aren't meant to support anything!

Rafael Maldonado says:

I love your videos and i was woundering if you can do a transmission kit on this same car

RD Cre8tv says:

Thanks for these videos.

dvdouden says:

Been watching your V70 videos, great stuff. Clear instructions and compliments to whoever was operating the camera!

Comments are disabled for this post.