Purchase this filter at http://www.filterheads.com/AQ1176C
AQ1176C filter fits:
Land Rover Discovery Sport 2015 – 2019
Land Rover LR2 2008 – 2015
Land Rover Range Rover Evoque 2012 – 2020
Volvo S60 2011 – 2019
Volvo S60 Cross Country 2016 – 2018
Volvo S80 2007 – 2016
Volvo V60 2015 – 2018
Volvo V60 Cross Country 2016 – 2018
Volvo V70 2008 – 2010
Volvo XC60 2010 – 2017
Volvo XC70 2008 – 2016
Volvo XC90 2014
The model shown is a 2015 Volvo V60, but installation is similar on the other models.
FAQ:
– FREE shipping on all orders
– We ship all orders to the contiguous (48) US states also to Hawaii, Alaska and the Canadian provinces
– No SALES TAX on ANYTHING (outside of Virginia)
QUESTIONS:
– Email: sales@filterheads.com
– Phone Hours: 8 AM – 5 PM EST Mon – Fri
– Toll-Free: 855-598-8551
){kind=link}
Purchase this filter at http://www.filterheads.com/AQ1176C
Won’t be getting a V60
I don’t know, I may be incapable, but I got only to the second step and had to stop because the fuse box did not budge at all and and didn’t want to pull too hard and break it !! Also, I was sweating like a pig and it was very difficult
The wire harness contains a fuse compartment under a small cover. To avoid removing just the fuse compartment cover, be sure to grasp the entire body of the harness while removing it. To ease the removal of the wire harness, first view the harness in the video after it has been removed. Notice that the actor is pointing out and depressing a spring clip on the upper leg of the harness. Unfortunately, this is not noted in the voice-over. Before attempting to pull out the harness, reach the index finger of your right hand over the top of the harness and feel for that upper leg and spring clip. While depressing the spring clip, rock the wire harness back from the top with your left hand. Once the upper leg is free, you can lift the lower legs of the wire harness out of the panel. When reinstalling, first insert the lower legs into the panel and then rock the upper portion of the wire harness forward to snap the upper leg into the panel. Wear a long sleeve shirt or jacket to avoid abrading your arms. You have to be a contortionist to accomplish this task.
Excellent video. Just what I needed. Thanks.
Thank you for this very detailed installation video!