Excellent video guys! I truly enjoyed watching it. I havent dont that
repair yet, so seeing some regular guys tackle it gives me hope that I can
too! Also, Scott’s advice did not fall on deaf ears! I was about 8oz LOW on
transaxle fluid! Thanks for the video guys!
Ok boss … you build em how you want.. that would never fly at my
shop…and as for everyone watching this dont put grease in a trans..manual
or automatic grease collects dirt…dirt is an engine and trans enemy..
I got VW Transmission like this but no have swing arm. I don’t know about
type of VW Transmission. So, many answer I am looking for few week ago.
Your video answer all. Thankss..
hell,your video helps a lot, thanks guys. i got a question i got a
dunebuggy, but this has the motor and transmission backwards, the
transmission, is gone, is not working any more, i got a new one, but this
is gonna works like the bad one? or i have to switch something inside of
the transmision? well i hope u could help me, thanks. my mail escoses45@yahoo.com
Yeah, I was just kidding about the phone ringing…actually, your video
really helped me. I am in the process of doing this now. I am trying to get
the dumb snap rings off now. stubborn suckers!
It would have been so much more effective had not the distraction of that
phone ringing in the background derailed my train of thought!!! Also,please
explain how to check transmission oil level to all of us novices who are
unfamiliar with the procedure. Thank-You in advance for Your indulgence.
U can avoid the grease debate and just use 90 weight gear oil as assembly
lube; that’s what is used to fill the transaxle. Don’t put clean parts on
dirty floor then into trans. The transaxle is filled through a hole behind
a 17mm hex plug just in front of the driver’s side axle. It is full when
the oil runs out. Be sure to go slow and top it off so oil has time to flow
in and really fill up. The plastic daisy cup should be snapped onto the
metal surface below it to be seated properly.
){kind=link}
Good info , phone drives me crazy :(
Helps a lot. Thanks
So who wanted to talk to you so bad they couldn’t leave a message?? Thanks
for the video
Answer the phone. We will wait….
turn off the phone
Thank you well done very helpful
you should pack the phone with grease!
Excellent video guys! I truly enjoyed watching it. I havent dont that
repair yet, so seeing some regular guys tackle it gives me hope that I can
too! Also, Scott’s advice did not fall on deaf ears! I was about 8oz LOW on
transaxle fluid! Thanks for the video guys!
GOOD VIDEO THANKS FOR YOUR KNOWLEDGE
Ok boss … you build em how you want.. that would never fly at my
shop…and as for everyone watching this dont put grease in a trans..manual
or automatic grease collects dirt…dirt is an engine and trans enemy..
should be between 0.001″ and 0.010″
its one thing to call once or twice but id have ripped a new asshole in the
person for calling that many times in such a short period
how do you press the bearing back into the axle tube?
what are you talking about the phone ?????
Holy shit! Slap the inpatient wife that has to hang up and keep calling
back!!!!
I got VW Transmission like this but no have swing arm. I don’t know about
type of VW Transmission. So, many answer I am looking for few week ago.
Your video answer all. Thankss..
Thank you well done very helpful
Answer the damn phone dude
thanks for this video I learned something today
Well done!
it’s a manual trans. you run gear oil. grease isn’t going to hurt it.
ok thanks
hell,your video helps a lot, thanks guys. i got a question i got a
dunebuggy, but this has the motor and transmission backwards, the
transmission, is gone, is not working any more, i got a new one, but this
is gonna works like the bad one? or i have to switch something inside of
the transmision? well i hope u could help me, thanks. my mail
escoses45@yahoo.com
Video helped alot, thanks for taking time to do it.
good video but you wife its anoing for the other guy the post guys dont
post lol that pretty gay thank for your video
Dude… would you put grease in your motor oil??? Why are you putting it in
the trans oil???? all that grease in the trans isnt good for the oil…
Good vid. Hey Rickman get the phone!!!
FYI – .001 and .0010 are the same thing, lol.
omg!! if that was my phone i would done beat it with the hammer! thaqt got
soooo anoyying!
Yeah, I was just kidding about the phone ringing…actually, your video
really helped me. I am in the process of doing this now. I am trying to get
the dumb snap rings off now. stubborn suckers!
Well now Im not scared of replacing the axles. Thanks guy!
Great video, Please answer the phone!!!!
do you know if you have to switch the axles from a 67 bug and and a 64? or
can you install the 67 axles on the car with the 64 brakes?
It would have been so much more effective had not the distraction of that
phone ringing in the background derailed my train of thought!!! Also,please
explain how to check transmission oil level to all of us novices who are
unfamiliar with the procedure. Thank-You in advance for Your indulgence.
U can avoid the grease debate and just use 90 weight gear oil as assembly
lube; that’s what is used to fill the transaxle. Don’t put clean parts on
dirty floor then into trans. The transaxle is filled through a hole behind
a 17mm hex plug just in front of the driver’s side axle. It is full when
the oil runs out. Be sure to go slow and top it off so oil has time to flow
in and really fill up. The plastic daisy cup should be snapped onto the
metal surface below it to be seated properly.
Good Video BUT answer the damn phone or unplug the thing!