I found this the easiest way to perform and it won’t put undue stress on your rachet.
How To Replace Your Toyota Serpentine Belt The Easy Way
20,743
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
I found this the easiest way to perform and it won’t put undue stress on your rachet.
You must be logged in to post a comment.
Thank you for video, explained perfectly. However, when I went to my vehicle the 19mm bolt to use is BROKE OFF?! Suggestions on what to do to get belt off? I have to change alternator.
thanks for your explain how to take off serpentine belt
Do you need to take the passenger side front wheel off to put the new belt back on?
easiest way is to check out the long serpentine rachet tool from Autozone for free.
Im working on Camry 2004 LE 6 cylinder and to get to that 19mm nut I had to first remove couple of things to have better access to it. I dont see that part held by two log nuts I had to remove, actually I cant find a film with exactly same model of Camry and yours seem to be a bit different under the hood, at least to me. You say yours is 06, mine is 04. Well, this was my first attempt tonight, unsuccessful cause didn't have the right wrench and wasn't sure which one log nut exactly was that 19mm. Will try again today, you're right,with the right tools it could be done. Thanks for sharing this.
Helped me a ton on my Camry
That's genius. I did this the old-fashioned way, and I kept thinking "I wish my ratchet had a curved handle!"
Great trick! Is it possible to do that with a breaker bar?
Thanks Paul, excellent trick. Great info for anyone who doesn't know where to start.