Car Fix DIY Videos

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ib/1ABFS06005

This video shows you how to install new, quality TRQ brake pads and rotors on your 2014-2019 Toyota Highlander. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obkv/1AXAA00013
• 14mm Wrench http://1aau.to/oV8/1AXAA00010
• 17mm Wrench http://1aau.to/oV8/1AXAA00010
• 14mm Socket http://1aau.to/obvT/1AXAA00015
• 17mm Socket http://1aau.to/obvT/1AXAA00015
• 21mm Socket http://1aau.to/oahx/1AXAA00043
• Brake Caliper Compressor Tool. Single Piston. Screw Style. http://1aau.to/oL/1AXAA00012
• Brake Caliper Hanger http://1aau.to/oiI/1AXAA00439
• 1/2 Inch Impact Gun http://1aau.to/os8/1AXAA00252
• 3/8 Inch Drive Ratchet http://1aau.to/obvT/1AXAA00015
• Torque Wrench http://1aau.to/oaFq/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Safety Glasses http://1aau.to/o2c/1AXAA00343
• Floor Jack http://1aau.to/o5U/1AXAA00068
• Jack Stands http://1aau.to/oTW/1AXAA00065
• Wire Brush http://1aau.to/osV/1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.