HOW TO Install a Lift Kit on a Jeep Gladiator Truck for Beginners

HOW TO Install a Lift Kit on a Jeep Gladiator Truck for Beginners

Installing a lift kit on a Jeep JT Gladiator is something you can totally do yourself and in this DIY video, made for beginners, we’ll show you exactly how to do it. While the kit featured is made by EVO Manufacturing, the step-by-step instructions will apply to most any standard coil and shock suspension system, from a basic 2” budget boost up to a 4.5”+ lift, complete with adjustable control arms and track bars. Of course, every tool you’ll need is identified, torque settings are stated and tips and tricks to help make the process easier, are provided as well. Trust me, this is something you can do!

HOW TO Install a Lift on a Jeep JL Wrangler:
https://www.youtube.com/watch?v=7EzDf1K_yOk&t=1s

Come join our online community at https://WAYALIFE.com

TOOLS YOU’LL NEED
• 8, 10, 11, 12, 13, 15, 18, 19, 21, 22, 24mm Sockets & Wrenches
• 9/16″ Sockets & Wrenches
• 1-7/8″ Crows Foot
• Socket Swivel
• Ratchet
• Short Ratchet Extension
• Long Ratchet Extension
• Torque Wrench 10-80 ft. lb.
• Torque Wrench 25-250 ft. lb.
• Vice Grips
• Floor Jack
• Jack Stands
• Pry Bar
• Rolling Head Pry Bar
• Trim Pry Tool
• Dykes
• Hammer
• Drill
• 3/8″ Metal Drilling Bit
• Tape Measure
• Spray Mount
• Brake Fluid

RECOMMENDED BUYS
EVO Enforcer Stage 3 Overland Lift: https://evomfg.com/products/4-5-enforcer-suspension-systems-for-jt-diesel?aff=2
1/2″ Impact Wrench: https://amzn.to/3WNeYLE 3/8″
Impact Wrench: https://amzn.to/43nIKJo 3/8″
Ratchet: https://amzn.to/43F2KqO 1/2″
Ratchet Set: https://amzn.to/45JrvnD 1/2″
Swivel Socket: https://amzn.to/3WYzkBR
Wrench Set: https://amzn.to/3NbsOEz
Gear Wrench Set: https://amzn.to/43Kn1Lt 1/2″
Torque Wrenchs: https://amzn.to/3WnlFGm
Ratchet Set: https://amzn.to/42rsGoK 1/2″
Crows Foot Set: https://amzn.to/3OUCO6f 3/8″
Crows Foot Set: https://amzn.to/3Nd7e2o
Pry Bar Set: https://amzn.to/3Cu6S1v
Rolling Head Pry Bar: https://amzn.to/3CdXdvH
Vice Grips: https://amzn.to/43pmsXS
Dykes: https://amzn.to/3IYLm8G
Hammer: https://amzn.to/43HjNIR
Trim Removal Set: https://amzn.to/3NaEOWW
Tape Measure: https://amzn.to/3OQGaaB
Floor Jack: https://amzn.to/3CiV1Tv
Jack Stands: https://amzn.to/3MSOLqu
Spray Adhesive: https://amzn.to/3CaVcQL

#jeep #liftkitinstall #wayalife #jeepgladiator #gladiatorjt #jtgladiator #jeepjt #jtjeep #jeeptruck #evomfg #evoenforcer #overland #suspensionsystem #howto #diy #ad

* Please note that the Amazon links posted are associate links and purchases made through them will help support this channel.

1,037
Like
Save


Comments

@chrislarsen1033 says:

Awesome video brother. im going to be in Vegas mid may I’ll txt you guys to see if we can get together. Please say hi to Cindy

@gilbertnadeau7181 says:

Wouldn't it be better to use a lubricant like silicon instead of a solvent like WD40?

@woof3598 says:

arnt you strarving the front pinion bearing when you rotate the diff upwards ?

@donlum9128 says:

That's an impressive torque wrench.

@woof3598 says:

alwas wondered why they used bolts that where threaded all the way instead of should bolts

@Coyote5555 says:

Simply the best and most detailed on the YT. Super helpful!

@efrainnunez1204 says:

Can you show how to install a lift on a 2000 Jeep XJ please ?!

@dillmonster260 says:

@wayalife do you have a how to video on how to replace a catalyst converter on a 2013 jk wrangler?
@DillMonster260

@JohnnyCamaro13 says:

How about the pinion angle on the driveshaft?

Comments are disabled for this post.