Car Fix DIY Videos

http://camryforums.com/how-tos is the leading Toyota Camry resource for technical, DIY guides. The dome light in your Toyota Camry is what enables you to see what goes bump in the dark inside the car. For the complete guide on how to fix and replace the interior light, please visit http://www.camryforums.com/how-tos/a/toyota-camry-how-to-replace-dome-light-396498.
Dome light replacement is a common repair on any vehicle. The process is straightforward and does not require specialized tools or expert knowledge.

In fact, the entire process takes just minutes to complete from start to finish. The cost for another bulb is usually just over ten dollars. Further, you can replace the old dome lights with newer, more technologically advanced LED lights. If you choose to do so, this upgrade will offer more dynamic lighting and longer lasting performance.

If you believe that you will need to not only replace the dome lights but also a fuse, then in addition to the other supplies, purchase a replacement fuse for this task.

The Materials you will need for this task are; Replacement bulb(s), a flat head screwdriver and the optional replacement fuse.

Step 1 – Remove the plastic cover

Using a gentle back and forth motion, pry off the plastic lid cover with a flat head screwdriver.

Step 2 –Remove the old light

Remove the old light from the socket by hand. Removal of the old light should not require much force. Simply release the light and discard it.

Step 3 –Install the new light

With the light socket now empty, you are ready to install your new light. Fit the metal brackets securely into the sockets (a reversal of Step 2), and then guide the light forward using your hand. Once again, there is no need to exert much force. Simply push the light forward and stop when you feel it is firmly in place.

Step 4 –Reinstall the plastic cover

Push the plastic cover closed. It’s recommended that you continue on to your remaining lights, so your entire Camry is well lit. Remove each cover as you did in the previous steps, and then detach and replace the old lights. Close each cover once you are done.

Step 5 –Check your new light

Check that your new dome lights work properly. If they are not functioning properly, it’s recommended that you check your fuse box before heading down to a local Toyota dealer for professional assistance. If you do have a blown fuse, pull out the damaged fuse and replace it with a new fuse. The amperage rating must be correct or the new fuse will not work.

Step 6 –Replacing a fuse

If the dome light is not working due to a blown fuse in your fuse box, you will need to pop the hood of your car and change out the old fuse using a pair of fuse pullers. Once the new fuse is installed, your new dome lights should shine brightly for you and your passengers to see clearly inside your Camry.

With your new dome lights installed, you can now shed some light on things that you were previously missing at night.Whether it was checking a map or just looking for loose change you are all ready to go.