This video shows how to remove a stator from a motorbike (DRZ400E).
CAUTION: I am not a qualified mechanic and all the information in this video should be used with discretion.
For all GPX files and to support my channel:
https://ko-fi.com/theapprenticeadventurer
Follow me INSTAGRAM:
https://www.instagram.com/the.apprentice.adventurer/?hl=en
Follow me FACEBOOK:
https://www.facebook.com/TheApprenticeAdventurer
){kind=link}
there's no phillips head screws on a drz they're all japanese industry standard and if you use a phillips you'll just mess them up and most likely round out the heads.
phillips and jis have different angles. phillips is designed to cam out at a specific torque, jis are designed to never cam out.
superb mate, how did you know this was next on the list for me… locktite mod was next on order for my steed.
The screws in cover would probably be JIS [Japanese Industry Standard] screws, not Phillips head, which normally causes the head to round out as the Phillips head driver doesn't seat correctly inside the head. Need to use a JIS screwdriver to remove them. I also use a hammer to lightly tap to help break the screw loose while turning.
Great video mate. Appreciate the effort. Do you have a link for the digital display USB part you mentioned?
Good home handyman self help video