Car Fix DIY Videos

Welcome to this tutorial on how to replace the boot struts on a Suzuki Alto 2013 model.

If you’re struggling with a boot that’s not staying up, then you might need to replace your boot struts. Don’t worry, it’s a simple process that you can do yourself with just a few tools and some basic knowledge.

Firstly, you’ll need to purchase new boot struts for your Suzuki Alto 2013. You can find these at most auto parts stores or online.

Once you have your new boot struts, you’ll need to locate the old ones on your car. They are usually located on either side of the boot, attached to the hinges. You’ll need to remove the old struts from the car by using a flathead screwdriver or a pair of pliers to disconnect the retaining clips.

Next, you’ll need to install the new boot struts. To do this, simply align the new struts with the mounting brackets on the car and push them into place. You should hear a clicking sound when the retaining clip snaps back into place. Make sure that both struts are securely attached before testing the boot to ensure it stays up.

Finally, test your new boot struts by opening and closing the boot several times to make sure they are functioning properly. If the boot still doesn’t stay up, then you might need to check the hinges and make sure they are not damaged.

And that’s it! Replacing the boot struts on a Suzuki Alto 2013 is a simple process that you can do yourself. With just a few tools and some basic knowledge, you’ll have your boot staying up in no time.