How to hook up Suzuki interface to Lowrance
Installing Suzuki interface to Lowrance
23,491
Like
Save
){kind=link}
- Tags:
Installing, Interface, Lowrance, Suzuki
- Categories: Suzuki
Comments
Comments are disabled for this post.
How to hook up Suzuki interface to Lowrance
Comments are disabled for this post.
Great video, I had it all wrong. I thought the hds would automatically read the engine. I was about to take it to the dealer to stnc them. Again thanks
Thanks for the video. Do you get trim position on your graph with this setup?
Thank ya sir. There’s a whole lot of non information out there for this nmea setup. That damned adapter cable got me. Bought the single engine adapter instead. A mistake made for my 250 2020. I learn that hard way every time.
Great Video, really informative and to the point. Thank you.
What do you need to get fuel burn and fuel tank level? Thanks…great vid. I’m setting up a lowrance Fs9 elite on a brand new 220 excel Baypro w 200 suzuki
Thank you for sharing some good info!!! Do you happen to know if this is the correct adapter cable item number 990C0-88136 ?
Great video I am wanting to set this up on my Suzuki DF70ATL2 outboard motor it’s a 2019 model. I am unsure of how to set up the interface cable to the engine and the adapter I have never been a mechanic.Any advise is greatly appreciated thank you.
Hi there could you please help me now and tell me the part numbers of the interface cable and the connecting Cobo I’ve got a Suzuki 80 hp 2019 and I’m really struggle with finding the right equipment I did send another message from my friends phone because mine wasn’t working sorry for inconvenience having to messages with the same questions thank you
Hi, can you help me with some guidance from where have you brought the interface cable and connector cable. I have a Suzuki 80 hp 2019 .thank you ☺️
Next time ask somebody to hold the camera!!!!
Thank you so much. Can’t believe there is nothing else online. You are the man!
Dear Sir, This is the only video that shows exatly how to connect..Thank you so much! I have got only one question.I have got a small boat where the nmea2000 end is really close to the engine.I would like to save cost if possible..Is it possible to connect the engine interface, directly to a SUZUKI DF25Atl or I also need an adapter cable. I mean if its so close can I connect the cable without the adapter? Is it only a task to lengthen the cable in case of longer distance, or possible to use if long enough the only interface cable with one end at the NMEA2000 and the other end at directly the engine connected?
Thank you so much in advance!
Great vid. This vid and one other vid are the ONLY vids explaining this! I like the color of that excel as well!
Dear RIVER CITY OUTDOORS!
I would like to ask if the Elite-7 Ti2 can be connected to the MNEA network with a Suzuki DF 9.9 BRS engine manufactured in February 2019 and serial number 00995F-912389. I would like to monitor engine data and operating information on my Lowrance. If possible, what are the conditions and what parts or cables do you need?
Thank you,
Best regards,
Szilard Dohany
Hi, the suzuki engine interface is just to buy the cable connect to a nmea2000 line and connect and operate or do you need any more cables? I have a suzuki 115 hp 2018 greetings