Signals flashing too fast on your Suzuki GSX-R1000? Slow them down without the use of load balancing resistors. Our plug and play LED Flasher Relay installs in minutes without the need for any wiring. For more info see: https://tstindustries.com/TST-2-Pin-LED-Flasher-Relay-Gen2-F.html?utm_source=YouTube&utm_medium=description&utm_term=2017_YT_PRODUCTS&utm_content=2017_GSX-R1000_RLY_install
Make sure to subscribe here: http://bit.ly/1jq2ZrN
Follow us on Facebook here: http://on.fb.me/1nuTjlF
If your signal lights flash too fast then this part is your hyperflash solution. It is very easy to install and does not require any special tools as it plugs right into the OEM harness. This component works with the following signal configurations: 1. All stock 2. Stock taillight, aftermarket signals 3. Integrated taillight, stock signals 4. Integrated taillight, aftermarket signals. We designed this part to fit exactly like the OEM part so the installation is a breeze.
){kind=link}
I actually prefer the fast flashing. Seems like it would be more noticeable that way, and safer as a result.
Does this work with the Yoshimura LED Turn Signal ?
This worked like a charm. I went to their site and put my bike model number and year in and got the relay. Signals are working again with the new LED signals.
Nice video. Clean, well-presented. Good job. Thank you.
I just replaced my signals on my 2013 GSXR 750 and only 3 LED lights one the mirror turn signals light up because it so fast. The back like just flash fast. Will this Flasher Relay work on my model?
Do you guys sell a led relay for a 99-02 Sv650? I have hyperblinking led's and dont want to connect 4 resistors lol.
Ive seen a 7pin led relay on ebay and Amazon but not sure if i should trust it.
Thanks for the video !
I have a gsxr1000 2011 and want to replace the oem relay with a 7pins. Do you know if place where the relay is located on a gsxr1000 2011 is the same as this 2017 model ?
My 2001 k1 GSXR 1000 all of a sudden keeps burning up the turn signal kickstand relay as soon as I put it in it starts for a minute then Burns it up and that's it. I've went through the whole wiring harness I don't see anything grounding out I don't know what to do anymore any suggestions??
What about on a vstrom 650
Good Day, I have the 2017 Suzuki GSX-R1000R/Z is what it says on the owners Manual. Being Canadian and in Victoria, I guess the Z must denote the Canadian Model, my question is this, and I believe the answer is one I think, but must be sure, does using that new relay control all four signals?? I am guessing yes—but have learned never to assume. Thereby I wouldn't need wire in an 8 ohm, 20 watt resistor either—Is that so??? Thank you for the knowledge and for sharing how to make the adjustments. Much Obliged.
Hi
I have a 2017 gsxr1000r but ia can't find this relay?