Car Fix DIY Videos

Buy Now!
New Oil Pressure Sender from 1AAuto.com http://1aau.to/ic/1AOSU00018

This video shows you how to install a new oil pressure sender from TRQ on your 2010-2014 Subaru Outback (2.5L H4). Oil pressure is the lifeblood of any engine. The last thing you want to do is run your vehicle while oil pressure is low. Even if the oil is at the appropriate level, low pressure situations can still occur!

This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Tools you will need:
• 14mm Wrench http://1aau.to/oact/1AXAA00010
• 15mm Wrench http://1aau.to/oact/1AXAA00010
• 26mm Wrench
• 10mm Socket http://1aau.to/obF3/1AXAA00017
• 12mm Socket http://1aau.to/ob6s/1AXAA00015
• 24mm Socket
• Circlip Pliers
• Ratchet http://1aau.to/ob7Z/1AXAA00016
• Torque Wrench http://1aau.to/obat/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oa3T/1AXSS00048
• Safety Glasses
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.