How to Replace Front Brakes 2015 Subaru Outback

How to Replace Front Brakes 2015 Subaru Outback

Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off

Buy Now!
New Brake Rotor from 1AAuto.com http://1aau.to/ia/1ABFS04036

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to the 15 Subaru Outback

🔧 List of tools used:
• Pry Bar http://1aau.to/tep/1AXAA00020
• 10mm Socket http://1aau.to/tn/1AXAA00017
• 13mm Socket http://1aau.to/taY/1AXAA00015
• 14mm Socket http://1aau.to/taY/1AXAA00015
• 17mm Socket http://1aau.to/taY/1AXAA00015
• 19mm Socket http://1aau.to/taN/1AXAA00043
• 1/2 Inch Breaker Bar http://1aau.to/tha/1AXAA00078
• Ratchet http://1aau.to/ta/1AXAA00016
• Socket Extensions http://1aau.to/taY/1AXAA00015
• Torque Wrench http://1aau.to/tp2/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• M8x1.25
• Rust Penetrant
• Floor Jack http://1aau.to/tqQ/1AXAA00068
• Jack Stands http://1aau.to/trf/1AXAA00065
• Wire Brush http://1aau.to/tdj/1AXAA00079

For More Info visit us at http://1aau.to/h/ar9/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

12,514
Like
Save


Comments

Daniel Hernandez says:

Is it the same process for the rear ones ?

Daniel Hernandez says:

My hats off to the tech ! I would allow her to perform open heart surgery on me no joke ! Lol

Michal Nalewajko says:

Why do you dont measure the runout of break disc?

Brian Kathenes says:

Superb video!!

panchovillaxx7 says:

As always a great video !!
When I do the brake job I never open the bleeding screw,is this necessary? I always unscrew the reservoir cap not the bleeding screw.

Amir Gladstone says:

Question why do you have to bleed the brakes when you decompress it. Is it because you added Brake fluid as the brakes where being used ?

WILL C. says:

Nice video, when I do mine, I always get a hardware kit 6or7 bucks. Didn't let the caliper hang, many do nice job.

Arthur Arutyunov says:

torque on caliper body is 27.5 ft lb

Anthony Guess says:

Best video quality I've seen yet for brake job including the angles shot for everyone to see also very thorough 🙂

Jacques Dahan says:

I loved your video until you touched the pads with your greasy gloves,

James Jaikissoon says:

you guys doing a rear brake job with the electronic brake system ?

Adam says:

Thank you !! can you also do rear brake job ?

Comments are disabled for this post.