In this video, we take a neglected Sega Saturn and do a full repair and recap.
Like, Subscribe and click that bell icon for more videos like this.
Thanks for watching.
Below is a list of tools and products I use and links to where you can purhase.
Soldering Irons
Yihua 939D+ III https://www.amazon.com/Efficient-Equivalent-Adjustable-Design-Plus-Magnifying/dp/B08F2KTCTB?ref_=ast_sto_dp
YIHUA 939D+ I https://www.amazon.com/YIHUA-Soldering-Equivalent-Automatic-Iron-burn/dp/B08BK4TXN6?ref_=ast_sto_dp
Hot Air Rework
YIHUA 959D https://www.amazon.com/YIHUA-959D-Digital-Efficiency-212%C2%B0F-932%C2%B0F-Iron-burn/dp/B08BK3M6YW?ref_=ast_sto_dp
Desoldering
YIHUA 948 https://www.amazon.com/YIHUA-Desoldering-Variable-Temperature-Function/dp/B08BK69H2M?ref_=ast_sto_dp
Solder, Flux and Accessories
MG Chemicals – 836LFNC-1L 836LFNC Lead Free NO Clean Flux https://www.amazon.com/MG-Chemicals-Clean-Litre-Bottle/dp/B01MYEE84K/ref=sr_1_9?dchild=1&keywords=MG+Chemicals&qid=1630321293&s=hi&sr=1-9
MG Chemicals 4140A Flux Remover https://www.amazon.com/Remover-Boards-Improved-Formulation-Liquid/dp/B07XDCRLR6/ref=sr_1_17?dchild=1&keywords=MG+Chemicals&qid=1630321293&s=hi&sr=1-17
Isopropyl Alcohol 99% (IPA) https://www.amazon.com/gp/product/B08QDJXCQ1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
KESTER SOLDER 24-6040-0027 Wire Solder, 0.031″Dia. https://www.amazon.com/gp/product/B00068IJPO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
KESTER Solder 60/40 .062 DIA. https://www.amazon.com/gp/product/B005T74XSY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
No Clean Tacky Soldering Flux https://www.amazon.com/gp/product/B07DCD9M3P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
No Clean Lead Free Low Temperature Solder Paste https://www.amazon.com/gp/product/B017RSGPI8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Kaisi 21.6 x 16.9 Inch Large Electronics Repair Mat https://www.amazon.com/gp/product/B083SRVP7D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Solder Fume Extractor https://www.amazon.com/gp/product/B08HYZYZZX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
KOTTO Solder Sucker https://www.amazon.com/gp/product/B08FDY2SGS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
){kind=link}
Very helpful video. I am working on recapping a Japanese VA0 launch Saturn. It has the same 2 through hole capacitors as yours and were pain to remove. I ended up with a couple of the holes getting filled with solder, tried everything to suck them out and it didn't work including using some wick. I was thinking about using my hot work station to heat up the area and then pushing the new capacitors through the holes. Heating up the pads behind the board with my solder gun isn't working helping, maybe there was to much solder left inside. If you have any ideas let me know.. Again great work, I wish I would of watched your video before I started lol
Another great video. Where ya been man? Missed you for a week.