Just wanting a follow up on this video. Ive sent my ecu to Your Parts Source for a rebuild. Want to know if the injector swap finally took care of the issue.
I forgot what was your problem on the car the you replaced them my car is pulling when i stop on the stop or traffic light like the cilinder is not working..
I'm changing the injectors on a Saab right now, what fuse did you pull to turn the fuel pump off? After I pulled F2, the car wouldn't start without it.
when i sent mine back to second time… he called me yesterday and said my computer was fine too…weird… replacing boost control solenoid..and air charge solenoid and injectors at any rate…but anyways.. one question tho you said replace the big o ring on the sleeves… where the heck do you get that o-ring? my ECM should be back fri or sat… and those sleeves/o-rings did not come with my injectors….only the orings on the actual injector. Just really need to get my car going asap..ive spent most of july with out it and its been hell… so i figured i'd watch this as prep… as ive never done injectors on this motor before…im guessing its a huge no no not to replace them… but the car has about 120k less miles than the one you worked on…. risk not replacing them if in good shape?
injectors need to be rebuilt every decade. along with most of the rubber seals in your motor. very rarely the injectors will short, but theyl start trowing codes at you check us out for Genuine Fuel injectors brands like Siemens Denso Bosch & rebuild kits https://www.injectorplanet.com/collections/saab-fuel-injectors/products/siemens-12790827 awesome tutorial.. thank you -Bryan
hi does this cause misfires under full boost ? also no codes come up right ?
I'll let you know how it goes.thx
Thanks what about the transmission swap cuzz u have to have a different CPU for the transmission?? My injectors says open
No close caption!!
Just wanting a follow up on this video. Ive sent my ecu to Your Parts Source for a rebuild. Want to know if the injector swap finally took care of the issue.
I forgot what was your problem on the car the you replaced them my car is pulling when i stop on the stop or traffic light like the cilinder is not working..
I'm changing the injectors on a Saab right now, what fuse did you pull to turn the fuel pump off? After I pulled F2, the car wouldn't start without it.
when i sent mine back to second time… he called me yesterday and said my computer was fine too…weird… replacing boost control solenoid..and air charge solenoid and injectors at any rate…but anyways.. one question tho you said replace the big o ring on the sleeves… where the heck do you get that o-ring? my ECM should be back fri or sat… and those sleeves/o-rings did not come with my injectors….only the orings on the actual injector. Just really need to get my car going asap..ive spent most of july with out it and its been hell… so i figured i'd watch this as prep… as ive never done injectors on this motor before…im guessing its a huge no no not to replace them… but the car has about 120k less miles than the one you worked on…. risk not replacing them if in good shape?
I thinknim gonna need to clean my injectors. I put some bad gas in my car and now my car wont start.
Hey, did it work?
injectors need to be rebuilt every decade. along with most of the rubber seals in your motor. very rarely the injectors will short, but theyl start trowing codes at you check us out for Genuine Fuel injectors brands like Siemens Denso Bosch & rebuild kits
https://www.injectorplanet.com/collections/saab-fuel-injectors/products/siemens-12790827
awesome tutorial.. thank you
-Bryan