Porsche 986/996 Indicator Stalk Replacement

Porsche 986/996 Indicator Stalk Replacement

How to replace the indicator and wiper switch assembly on a Porsche Boxster 986 or 996 model 911. Tools Required: 8mm spanner 10mm spanner T-30 Torx screwdri…

55
Like
Save


Comments

Tolga Oezay says:

cool thx

David Buchmiller says:

Thanks for posting this. Like others saved me a ton.

coolbro7500 says:

Fantastic vid – thanks !!!!

puptread says:

nice video,thank you,it saved me a fortune

Pete N says:

1. I turn the Ignition on. unplug the battery. Wait at least 10 mins.
2. (Then turn off the Ignition then unplug the air bag? )

Pete N says:

Great video. My signal broke the other day. Waiting on my new one to replace it.. Thanks for the video…

CDLVancouver says:

cool thanks helped a ton!
two things from me:
1. the t-30 can be a real pain and i think that one side (left) may have even been a t-27! and
2. my ’02 had two extra plugs to disconnect/reconnect onthe left hand side. nothing big just two little plugs

chivobones says:

Great video. Thank you for posting…

QuentinGlass says:

Many thanks, cheers from Germany

dandaman gs says:

Awesome!!!  Thank you! Worked like a charm – and saved me a bunch of money!

Adrian Roach says:

THANKYOU!!!!!!!

thugzthrust says:

Thank you. I followed this and it worked perfectly. I also made a video of just the stalk as a video response. Be greatful for you to accept.

vonephrommany says:

Thank you sooo much for this awesome video. I’ve saved time and money doing it myself. The detailed instructions were right down to the T. Love it. Again, big thank you.

Asad Siddiqi says:

Wow Thanks for the great videos ! I love your channel . I have a BOXSTER S 2003 and I cant find anywhere how to change the rear turn signal bulb. Its not in the owner’s manual. Any insight or link would be highly appreciated. Thank you very much.

Saeid Momtahan says:

Fantastic!
And thanks for the nice music.

Greetings from Iran

MSMCPA says:

Fantastic, thanks so much.  Saved $300 and learned my mechanic is a bit heavy on his time charges.

986london says:

Kenzodapredator, if the airbag light is on, its because the ignition was turned on with the airbag disconnected at some point. To switch off the light you need the Durametric cable and software I use in the other video.

kenzodapredator says:

My airbag lamp stays on after installing !!!!! Have i done something wrong ??? Any answers would be helpfull please..

Kidney Shanker says:

Thanks.

remusicaustralia says:

Very Good Video Thank you, The only thing I would add is that at Step 14 when you disconnect the two wiring plugs, there is also a small wiring clip to be removed that is attached to the faulty switch unit , the new switch unit comes with this wiring plug attached ready to plug in. Hope this is useful.

icemouse80 says:

veri good video !!!!

Write a comment