http://www.1aauto.com 1A Auto shows you how to repair, install, fix, change or replace a broken door lock cylinder. This video is applicable to 1982-1992 Che…
http://www.1aauto.com 1A Auto shows you how to repair, install, fix, change or replace a broken door lock cylinder. This video is applicable to 1982-1992 Che…
You must be logged in to post a comment.
You should show the removal and reinstallation of the piece that the lock
rod connects to. It seems to be the most difficult part as it is such a
small piece and hard to put back on.
Yes, if you don’t have power windows you would need to remove the manual
window crank first. We do have a video on our channel that will show you a
few different ways on how to do this. 1aauto.com 888-844-3393 FREE SHIPPING
in the lower 48 states!!
You should add that the manual crank windows need a special spring removal
tool to remove them. Was going to do mine today, got all ready, and had to
stop at the first step. Going to pick up this special tool tomorrow, and
try again. Next steering column repair and ignition cylinder replacement.
can i change my 87 chevy caprice they same way?
The concept is going to be the same but the bolt sizes as well as how to
remove the door panel might be slightly different.
Unfortunately we do not have a video currently but we will keep this in
mind for one later on down the line.
The cover of the fuse box should be labeled to tell you what each fuse goes
to. You may have a loose or frayed wire somewhere that’s causing the dash
lights to turn off on you.
On a car that old, you should be able to get a metal coat hanger,
straighten it our, then add a small loop on the end big enough to hook the
door lock stick inside on the top of the door panel. You should be able to
worm the coat hanger inside the top of the window, catch that button then
pop the lock,
what fuse is it, and also its a berlinetta so it has the digital gauges and
the tach and mph keep turning off whille im driving so i cant tell my speed
or rpms thanks fo previous reply
ive got an 85 camaro and the trunk lock was removed before i bought it and
the release button is not working how do i get my trunk open
Is this process pretty much the same for the 98-02 F bodies?
would be great if you can do ignition cylinder thanks
Hi there, Did you do a VT for this on the Mustang? Cheers
thanks for reply but looks like im ganna have to do some exploring cause to
the right of the fuse box there is an aftermarket toggle switch which i
cannot tell what it does
it is similar but the body styles are different as well as the door panels
will require some different tools to remove them from the door frame.
You may want to check the fuse to see if it’s blown. If there’s no lock in
the truck, you would need to get the hatch release working to pop the
hatch. Hope this helps you out. 1aauto.com 888-844-3393
hey great store and vids… Do you have a vid of How to remove ignition
lock cylinder? on the iroc?
Thanks! Needed to see it done so that I could have the confidence to do it
myself.
My 64′ chevelle is locked with the key in it, a genius locked the door but
is there a way I can take the old cylinder off from the outside, and unlock
the door.
thanks for the help