Peugeot Partner Won’t Start, Air Ingress in Diesel Fuel Line How To Repair and fit non return valve

Peugeot Partner Won’t Start, Air Ingress in Diesel Fuel Line How To Repair and fit non return valve

Been having issues with the Peugeot Partner when left overnight the fuel system develops into the main diesel pipe this video shows how to replace a leaky injector return pipe which means removing the inlet manifold and also fitting a non-return valve into the main fuel line

783
Like
Save


Comments

Andy D says:

Having the exact same problem with my 2007 Peugeot Partner van. Going to give this a go and will let you know. Great video and advice.

Sat Richard says:

hi, im having the same problem. air ingress from the fuel filter. my car is a ford 1.4 tdci. the engine is made by peugeot. I've changed everything from the fuel filter to the priming bulb assembly and the fuel filter to high pressure pump lines but the problem still persists. I've attached all clear pipes to see from where the air is getting in and found out the diesel filter to be the culprit. so, removed the filter assembly and pressure tested it to 25psi and found no leaks. there is no air from the tank to the fuel filter but air bubbles come out from the fuel filter and the engine stutters a lot. any suggestions? thanks!!

Write a comment