Here is the full service on the Peugeot 308 1.6 HDI diesel model years 2013, 2014, 2015, 2016, 2017, 2018, and 2019.
If this video helps then please support me by subscribing and liking the video, thank you!
Sump plug size is 21mm, torque requirement 34Nm
Oil filter housing 27mm, torque requirement 25Nm
Oil capacity 3.8 litres.
Air filter:
There are 3 T25 Torx screws along the front and a metal clip on the side that is easily done by hand. Make sure when fitting the new filter that the edges of the filter are definitely seated correctly.
Fuel Filter:
Remove the soundproof material on top of the engine. The fuel filter is located to the left hand side of the airbox/intake. Remove all the hoses and the electrical connector. There are 2x 8mm bolts at the rear and this will allow the top and filter to be removed from the car. Once you have removed the filter complete with the top if you lift the centre part by twisting this will allow the filter to be drained. Now remove the 3 T15 Torx screws. Now fit the top to the new filter making sure you replace the seal and fit completely square as the seal is easily dislodged. Push the centre down and replace the Torx screws. You can now refit to the car take care the bottom of the filter seats correctly, replace the hoses and electrical connector. Tighten the 8mm bolts. Cycle the ignition a few times as on a lot of cars this will allow the pre-delivery pump to fill the new filter. Now start the car and leave running for 5 minutes to make sure there’s definitely no air.
Cabin Filter:
This is located in the drivers footwell on the right hand drive models just to the left of the clutch. Remove the kick panel insulation with Bojo Tip 3 then the side panel to the left of the clutch pedal. The filter is in 2 parts pull the tabs to remove. Refitting is the reversal of removal but make sure the new filters are pointing the correct way. They have a black arrow on and this should point to the rear of the car.
If you’d like to support my channel please visit my websites and follow my socials:
http://www.tolly.co.uk
http://www.cleverproducts.co.uk/bojo-tools
http://www.instagram.com/tollyswift
http://www.twitter.com/tolly_swift
Thanks!
){kind=link}
I like the way you did most of it with one hand and your left hand; and I have assumed you are right handed:)
You wouldn't know by any chance where is the power steering wheel fluid reservoir is located on this model? I just can't find it to check the fluid level. Thank you
oil 0w30 ? 5W30 ?
THX FOR HELP 😉
hi mate, 4 liters enough for it?
That's a pretty useful video… Hate the look of that cabin filter I bet there was no sound to hide the swear words.
Thx!) When will be 1.5 BlueHdi 130 HP?
Recently just got a 308 and this video helped a lot to show ease of servicing hardest part be that bloody undertray
thanks bro from Belarus
Je vous remercie beaucoup
Thank you sir for your time and your expertise. Congrats
Much appreciated – no nonsense and very clearly demonstrated…even I could manage it now – thanks
Which grade oil is best for the 16 valve 1 6 hdi engines?
I hear they are notoriously delicate
Whats is the year of this car? And motor Code?
Exist different types of fuel filter and Air filter that It depends of the year of manufacture.
undercarrige bolts are M10 x XXmm? or Mxx X 10mm?
Is there any chance you could link the filters and everything you need in the description?
Hello there. Thanks for the video. Very useful. Are there any frequent known defects with these engines ? I am looking at buying one and i was wondering if it is safe to buy one that already has 200 000km on bord. Any feedback would be much appeciated. Thanks !
In the lubricant advisor it says oil capacity is 3.75 (with oil filter) i guess? . Can you please tell me is 3 litre enough to get minimum oil on the dipstick, or 3.25l maybe?
Hi after how many miles do you do these filter changes on your Peugeot
Because Patented MAHLE pin element for oil filters; first change oil filter (avoiding oil remains). https://www.youtube.com/watch?v=YSHif5Fde7E
I'm about to buy this moden 2015 and this video helps me a lot.
I have a megane 2 2002 now and i can say that it would not be difficult me to do it 🙂 as i do it on my megane 2.
Many thanks for the video.
Whats the clicking sound when the engine is running? I have the same car and it sometimes makes the same sound. Is this common on these models?
When you screw of the oil-filter then a lot of old oil will come out. So i would close the screw at the bottom after oil-filter change.
hey buddy, its a very helpful video
thanks