Car Fix DIY Videos

Buy Now!
New Throttle Body Assembly from 1AAuto.com http://1aau.to/ib/HTTBA00007

This video shows you how to install a throttle body on your 2008-2013 Nissan Rogue. Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obfE/1AXAA00013
• 10mm Socket http://1aau.to/oa4f/1AXAA00017
• 13mm Socket http://1aau.to/obmU/1AXAA00015
• 8mm Socket http://1aau.to/oa4f/1AXAA00017
• Trim Tool Set http://1aau.to/o7f/1AXXX00006
• Needle nose pliers http://1aau.to/oBV/1AXAA00051
• Needle nose pliers http://1aau.to/oBV/1AXAA00052
• Pliers
• Gloves http://1aau.to/oUP/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses http://1aau.to/oM6/1AXAA00343
• 5mm Hex Socket
• Drain Pan http://1aau.to/oxN/1AXAA00320
• Funnel http://1aau.to/ohB/1AXAA00310

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.