https://www.1aauto.com/nissan-heater-blower-motor-with-fan-cage/i/1ahcx00341?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=GL2XydeS7w4
1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor. This video is applicable to the 08, 09, 10, 11, 12, 13 Nissan Rogue
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1AHCX00341
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• 10mm Socket
• 13mm Socket
• 8mm Socket
• Needle nose pliers
• T20 Torx Driver
• Ratchet
• Socket Extensions
• Swivel
🔧 Instructions:
1. Removing the Lower Dash Trim 0:23
2. Removing the Steel Support 3:47
3. Removing the Brake Pedal and Gas Pedal Assembly 5:44
4. Removing the Blower Motor 9:47
5. Installing the Blower Motor 12:33
6. Installing the Brake Pedal and Gas Pedal Assembly 16:39
7. Installing the Steel Support 19:40
8. Installing the Lower Dash Trim 21:19
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Thank you so much for this video, I absolutely couldn't have replaced mine without it. If only I could have done it in anywhere close to 21 minutes.
Step 1 of service info: “Remove instrument panel.” (That means take out the dash.)
thanks for this video, I repaired my car following your video, also thank God everything went well
Once again, awesome and super informational video! Gonna attempt this one right now. Doesn't look too bad compared to some I've seen.
Hi I had my blower motor replaced by AAA and since that time my car pulls to the left and right. it seems like it needs a wheel alignment, which I did, but it didn't help. Is there any way that replacing the blower motor would have caused this to happen?
Thank you! I just finished replacing ours in a 2012 nissan sentra, i followed your instructions in this video and it helped me alot.
Can someone please tell me where the fan is located on a 2014 Rogue ?
OMG… Thank you for this video!
Saved me tons of time and shop costs… Only thing that sucks is the brake connector gets in the way of the removal and install… Was afraid I was going to break some of the blades… Just have to push past it.
Other than that, it was a simple, but long process. Two plus hour job…
Glad I had something to compare to!
Push in on the blower motor and turn it counter clock wise…
I CANNOT get the blower motor to unlock from the housing. Anyone have any tips?
“Just remove that 10mm screw holding the blower motor on”
Easier said then done.
Muchas gracias por tu vídeo me ayudó mucho
Can you access the blower motor by taking the radio out?
Any other car: 1. remove vanity panel 2. disconnect electrical connector. 3. Remove three screws holding blower motor and remove blower motor.
Thank you for the video! I just replaced mine using this video as a guide.
Great video, I was able to replace in 3 hours, as another person said that bracket definatlu has to come out. Also had some difficulty getting a good grip to turn out the old blower. Other than that pretty easy to follow. Thank you for the video!