http://www.1aauto.com/1A/Drivetrain/Nissan/Maxima/1AEMX00028 1A Auto shows you how to repair, install, fix, change or replace a failing, worn out, or defecti…
http://www.1aauto.com/1A/Drivetrain/Nissan/Maxima/1AEMX00028 1A Auto shows you how to repair, install, fix, change or replace a failing, worn out, or defecti…
You must be logged in to post a comment.
03 maxima se got codes p0447 p0159 p1167 p0420. The p0447 is a vent control
valve. Now I’m having trouble filling up the tank. I have to fill it slowly
but I don’t think I can fill it completely. Also the gas Guage is not
working properly. Are these the symptoms that the vent control valve needs
to be replace?
This should not cause the tank not to fill up all the way. Your issue might
be related to the vent on the fuel filler neck.
We carry them on our website. If you have a 03-08 Nissan Maxima V6 3.5 Part
Number: 1AEMX00028 on 1aauto.com 888-844-3393
Can u help me how to replace vent control valve on nissan altima 2002 please
i have a 2001honda accord ex 4cyl code p1519 came out do I need to replace
idle air control? or just clean it
my chevy surburban is showing a p0300 code….is it my vapor canister purge
valve…how can i tell? my check engine light has been on for 4 days now,
it is not flashing it is steady on. I’ve checked my gas cap. I noticed
since ive had the 2003 chevy, it does not have a back fire, but when i stop
breaks and take off, it jerks. plz help!
If you enter your information into the check out on our website, it will
tell you how much the chipping charge would be to your area. 1aauto.com
888-844-3393
You’re welcome! have a great day.
Something like that could be anything unfortunately. Sometimes it is a
spark plug. Sometimes it is an ignition coil. To properly diagnose the
vehicle you will have to bring it to someone who can do a road test with a
scan tool attached to it to see exactly what the engine is doing.
great video thanks!!
You could try to tap on the charcoal canister valve to see if it un-sticks
for you. Hope this helps you out, 1aauto.com 888-844-3393
does this apply to a 2003 maxima? i got engine code p1456. failed canister
purge valve/vent solenoid or failed fuel cap… unfortunately its not the
fuel cap.
Would this prevent the tank from being filled all the way? I can only get
the tank half full.
We currently do not have an auto repair video on this particular repair.
Also check for a possible vacuum leak, and check the evap canister valve to
see if that’s working right. If there’s a valve on there that’s sticking it
will throw a code. I had this happen on a 98 Altima I had. Hope this helps
you out. 1aauto.com 888-844-3393
if its the v6 3.5L engine, should be the same as this video, if its the v4
2.5L you could lift the car, secure it with jacks and look to see if its in
the same place as the video
If it’s throwing that code it could be the canister valve or possibly the
gas cap. You may want to check those.
P1440 = Evap Control System Small Leak
I have an 01 maxima & po446 is the code changed the gas cap now this might
have to be the 2nd step
Would this be the p0444 code?
You can try to, it doesn’t always work though. You may just need to replace
it with a new one. 1aauto.com 888-844-3393
Do you have a video for the repacement of the canister itself? already
replace the valve that was full of dirt.
At the current time we do not. There should be only a few bolts that hold
it in place.
This is for the EVAP system ? Would it throw a code if its bad ? Like mabey
a P1440 ?
where would I find the vent valve on a 02 Maxima?