https://www.1aauto.com/2002-06-nissan-altima-sentra-starter/i/1aest00385?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=75L_l13Uffw
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn or faulty ignition starter switch. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1AEST00385
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver
• 13mm Wrench
• 8mm Wrench
• 10mm Socket
• 17mm Socket
• 8mm Socket
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Pick
🔧 Instructions:
1. Disconnecting the Battery 0:25
2. Removing the Air Intake 0:34
3. Removing the Starter 1:46
4. Installing the Starter 6:50
5. Installing the Air Intake 11:27
6. Connecting the Battery 12:40
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Will this work for a 2001 nissan altima?
All good, only 1 small tiny suggestion, grab a tiny little piece of 120 grit sandpaper and sand the positive wire connection terminal at the starter side, it seemed very dirty and rusty so a little sandpaper would have left it shiny and ready for a nice flow.
Thank you so much, your video helped me change my starter motor by myself….. I’m pretty impressed right now!!
Thank you for this video. 1A auto is the end all for me on almost every repair I need on every car.
This is the best instructional video for changing a Nissan X trail T30 Automatic trans starter Motor. Thanks heaps would give 10 thumbs up if I could 🙂 Took me 1.5 days to sort out. Can Confirm the same tools work (17mm Bolts etc.). You just need to remove the whole Air filter Box and unfasten the wire from throttle Body and other hook ups. No need to get under Car. Same part works. Thanks so much for vid ended up gettin a new part in for $300AU (including $80 worth of tools (breaker bar etc.)). Pixked up new starter from Repco on the spot for $211. All up saves me $600 Au easy 🙂 cheerz big Earz
Hi its it's same proses to renplace starters on nissan sentra gxe thank u..
This video is a lifesaver. Couldn't have been shown better thanks guys.
I had no idea where the starter was. This video seriously helped me get my girls car started this morning. She praised me in more ways then one lol. Thanks bud!! Instant follow!
Just going to say I respect any non professional DIY mechanic that did this fix, because this swap looks pretty difficult
Everything I have learned about my cars I have learned from you guys! Thank you so much! I’ll never go to a mechanic again
Thank you guys for the video. I am going to try and replace the starter on my 2005 Nissan Altima. Let’s see how it goes!! I am not much of a mechanic so I’m hoping everything comes out well and I don’t mess up my car. Lol
Those radiator brackets are rusted to poop
clean cable end with wire brush or sand paper before install. great video
How much will it cost if I do it in garage?