http://www.1aauto.com/1A/WindowRegulators/Nissan/Sentra/1AWRK00333 http://www.1aauto.com/1A/WindowMotors/Nissan/Sentra/1AWPM00128 1A Auto shows you how to re…
How To Install Replace Power Window Motor or Regulator Nissan Sentra 00-06 1AAuto.com
42
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Are the passenger and driver the same kind of motor
I’ll be replacing the driver’s window lift motor on a 2001 Nissan Xterra.
The door and window lift assembly look similar enough to get an idea what
to do. Thanks, great video
Thanks for sharing this. It’s very helpful. Best wishes.
You should be able to reach in the door and push it up into place with your
hand. If you can’t, the window regulator cable might be broke and jamming
it into place. You may need to free up the cable if this has happened.
1aauto.com 888-844-3393
Question how do I get the window to come up to replace the motor?
The plug end on the window motor may have been wired in the wrong order.
Sometimes you can take the wires out of the plug and reverse them. If this
is a window motor that you have purchased from us, and you can’t fix the
issue, call our sales staff right away and we’ll take care of this for you.
1aauto.com 888-844-3393
Just a quick question – I installed the replacement motor and regulator –
everything went smoothly – the only problem though is that the switch (to
raise or lower the window) is now reversed. Down is up and up is down. I
don’t think I reversed any wires during installation. There really no way
to do that since all the connectors are dummy proof (no way to accidentally
reverse them). Any ideas?
Fantastic and thanks so much for making and publishing this helpful video.
I was happy to order the parts from you and will absolutely do business
with you again the future.
question. is it more often the regulator or wiring that needs to be
changed? Thanks!
You would need to replace the window regulator assembly, the cable is not
serviceable. We carry new window regulators on our website for your Nissan
Sentra. 1aauto.com 888-844-3393
I just want to say thank you. This video was incredibly helpful!
What should I do in my case? So my motor is dead but the window glass is
all the way down at the bottom, I couldn’t pull up the glass at all since
the regulator is holding it. Which means I can’t even pull the glass up to
the point where the bolt that holds the regulator with the window.
hi can you do a video of how to change the cable that looks like the cable
that are used for the breakes on a bike the motor works fine but that
cableis not totaly broken the cable is broken half way it have some wires
broken in that cable and it looks not that is holding it from circulating
in the motor so can i change the wier or i need the hole thing replace?
sorry for the spelling english is not my first language
If you plan on replacing the whole unit with the motor, what you can do is
cut the wire holding the glass and then slide up the entire window to get
to the bolts holding everything in.
HI Joshua, It really isn’t one situation over the other. There are
typically a few different things that can go wrong that would cause your
window to stop working correctly. 1aauto.com 888-844-3393